Working area
Published model range
OMTech
73/100Score1 reviewManufacturer store · omtech.com
USD · tax & shipping extra · Recorded 2026-11-19
Galvo split 30W / Machine
$1,699.99Research byPickaLaserResearch updatedResearch method
This comparison covers OMTech GALVO Split using published specifications, recorded seller prices and any available owner evidence.
Selected configuration: Galvo split 30W / Machine · omtech.com · Original listing ↗
Metal identification & engraving



Published model range
Cooling not published
Windows only
A 50W split-galvo owner saw repeated disconnects and an unrecognised-board message on a Mac. In the follow-up, the owner traced the issue to an internal USB extension and called it an easy fix. The board-signature message alone had not proved that the controller was unsupported.
Reddit · Owner-reported case
A 50W split-galvo owner saw repeated disconnects and an unrecognised-board message on a Mac. In the follow-up, the owner traced the issue to an internal USB extension and called it an easy fix. The board-signature message alone had not proved that the controller was unsupported.
The post explicitly names an OMTech 50W split Sino galvo. It is not an integrated, autofocus or MOPA report.
Read original source: 50W split galvo: a USB extension caused disconnections ↗An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.
Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.
Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.
The owner describes the failure, troubleshooting and a confirmed repair or replacement outcome.
Reddit · 2026-01-07 · Patriotsbuildbetter · Self-reported use
A 50W split-galvo owner saw repeated disconnects and an unrecognised-board message on a Mac. In the follow-up, the owner traced the issue to an internal USB extension and called it an easy fix. The board-signature message alone had not proved that the controller was unsupported.
Read the original discussion: 50W split galvo: a USB extension caused disconnections| Rated power | 30 W |
|---|
| Depth | 0.003 in. (0.08 mm) on a single pass |
|---|---|
| Machine weight | 66 lb. (30 kg) |
| Frequency | 30-60 kHzSource ↗ |
|---|---|
| Marking speed | 394 ips (10000 mm/s)Source ↗ |
| Precision | ±0.000004 in. (±0.1 μm)Source ↗ |
| Laser source | RaycusSource ↗ |
| Rated power | 30WSource ↗ |
| Wavelength | 1064 nmSource ↗ |
| Working area | 6.9 x 6.9 in. (175x175 mm)Source ↗ |
| Max speed | 394 ips (10000 mm/s)Source ↗ |
| Positioning accuracy | ±0.000004 in. (±0.1 μm)Source ↗ |
| Software | EzCad2 for Windows XP, 7, 8, or 10 (32/64 bit)Source ↗ |
| Dimensions | 58 × 35 × 65 cmSource ↗ |
| Machine weight | 32.5kg / 72 lb.Source ↗ |

ComMarker
LightBurn is supported.

Haotian
LightBurn is supported.

Monport
LightBurn is supported.

Gweike
The listed working area is G2 20W: 110mm*110mm/150mm*150mm.