Working area
Selected field
Gweike
65/100Score12 reviewsManufacturer store · gweikecloud.com
USD · tax & shipping extra · Recorded 2026-11-19
G2 20W Metal & Plastic Fiber Laser Engraver / Electric Lift ( 150*150mm field lens )+ Safety Shield
$1,349Research byPickaLaserResearch updatedResearch method
The G2 family has owner reports covering brass coins, jewelry and drinkware, plus a G2 Pro 30W owner who achieved consistent color with LightBurn. The current G2 20W listing specifies a 6.5 kg machine with 110 × 110 mm or 150 × 150 mm marking fields, making that version worth considering where bench space matters.
The compact format has practical compromises: one G2 owner added an enclosure and larger extraction system, while a G2 Max owner returned theirs over head play, slow powered lift and extraction layout. A G2 Pro 30W owner also noted column play, although it had not affected their engraving quality.
Metal identification & engraving



2 hours · 1,000 mm/s · 100% power
Selected field
Air-cooled
Windows & Mac
Windows & Mac
Gweike supplied the G2 Pro. The reviewer disclosed affiliate links.
Watch on YouTube · Hoffman Engineering · 6:54 ↗Gweike supplied the G2 Max. The reviewer disclosed affiliate links.
Watch on YouTube · Hoffman Engineering · 7:37 ↗Gweike supplied the G2 Max. The reviewer disclosed affiliate links.
Watch on YouTube · Hoffman Engineering · 8:30 ↗Gweike supplied the machine and sponsored the video.
Watch on YouTube · TimWelds · 7:13 ↗An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.
Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.
Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.
The owner documents the fault, test conditions and several troubleshooting steps; the cause remains unconfirmed.
The owner describes actual setup or software use, including a practical limitation; the account is more specific than a general endorsement.
The owner documents the fault, test conditions and several troubleshooting steps; the cause remains unconfirmed.
The owner describes a concrete setup problem and later confirms that the adjustment or workaround worked.
The owner describes a specific operational problem, but the available account does not establish its cause or a completed repair.
The owner describes actual setup or software use, including a practical limitation; the account is more specific than a general endorsement.
The owner reports settings and unsuccessful aluminum engraving, then explicitly confirms that adjusting focus worked. This is a resolved setup case, not proof of a failed source.
The owner gives a concrete purchase or support interaction and its outcome, with limited information about sustained engraving performance.
This is a short first-person verdict with little detail about workload, settings or troubleshooting.
The owner gives a concrete purchase or support interaction and its outcome, with limited information about sustained engraving performance.
The owner describes a specific operational problem, but the available account does not establish its cause or a completed repair.
This is a short first-person verdict with little detail about workload, settings or troubleshooting.
Reddit · 2026-09-09 · PM_ME_UR_PUPPERINOS · Self-reported use
After several working months, a secondhand G2 stopped producing output. The owner found what looked like damage around the fiber or its bond and described slow support replies. A local repair shop considered it unrepairable. The cause and nature of the damage were not independently tested.
Read the original discussion: G2: a secondhand machine lost outputReddit · 2026-08-24 · gameryamen · Self-reported use
The owner said the machine worked normally. The small fan in the supplied hood did not meet their indoor extraction needs, so they added an enclosure and a larger filter box.
Read the original discussion: G2: working machine, but the owner added fume extractionReddit · 2026-07-14 · nokua · Self-reported use
An owner said the machine restarted when firing and that USB connection sparks damaged a laptop. They were unhappy with support. These are serious user allegations; there is no independent electrical diagnosis or manufacturer confirmation of the cause.
Read the original discussion: G2 Pro: an owner reported restarting and an electrical incidentReddit · 2026-07-14 · Ok-Couple2656 · Self-reported use
An owner described generally stable operation, with overheating in a garage around 90°F. They reported no recurrence after adding a fan above 80°F. Their claimed business payback was not independently verified.
Read the original discussion: G2: a warm garage required extra airflowReddit · 2026-07-14 · PhiLho · Self-reported use
An owner could not get normal operation in either of two software packages. Square framing became a triangle, and supplied configuration files did not resolve it. They planned a return but acknowledged that user error had not been ruled out.
Read the original discussion: G2 Max: framing problems led an owner toward a returnReddit · 2026-04-18 · SeveralCamera292 · Self-reported use
An owner liked the value of their historical purchase, reported that LightBurn worked and said they could produce color consistently. They criticized the original software and loose lift column but said the play had not affected their engraving quality.
Read the original discussion: G2 Pro 30W: working LightBurn setup, with a loose lift columnReddit · 2026-01-07 · CryptographerVast609 · Self-reported use
The owner first achieved deep engraving, then could only roughen the surface. Their follow-up said that correcting focus restored normal results. This was a resolved focusing problem, not confirmed source-power loss.
Read the original discussion: G2: refocusing restored engraving depthReddit · 2025-11-16 · No_Celery_5373 · Self-reported use
An owner disliked head play, slow powered lift and the extraction layout and preferred a conventional desktop machine. They later reported a straightforward return and remained open to the brand.
Read the original discussion: G2 Max: mechanical play and slow lift led to a returnReddit · 2025-10-24 · Polysculpt · Self-reported use
An owner said they liked their 50W G2. Discussion of the then-unshipped G3 in the same thread is not evidence of G3 use.
Read the original discussion: G2 50W: a brief positive ownership accountReddit · 2025-08-29 · CplHicks_LV426 · Self-reported use
An owner described brass coins, slate, jewelry, drinkware and plastic-case jobs. Support helped when they bought a new lens. Their claim that the machine earned back several times its cost is self-reported and unaudited.
Read the original discussion: G2: regular project work and helpful lens-purchase supportReddit · 2025-08-16 · ChrisACramer · Self-reported use
A previously working machine developed distortion near curves, and engraving appeared about 1 mm larger than its framing. The owner asked whether to recalibrate. There is no confirmed diagnosis or repair update.
Read the original discussion: G2 Max: an owner asked about distortion and calibrationReddit · 2024-03-08 · Albuyeh · Self-reported use
An early buyer liked the machine's performance but considered the supplied software average. Accessories raised their historical spend from about $1,500 to nearly $2,000. Their comment that LightBurn support was still pending reflects that time, not current compatibility.
Read the original discussion: G2: strong early results, with software and accessory costs| Rated power | 20 W |
|---|---|
| Working area | 150*150mm |
| Machine weight | Net Weight: 6.5Kg |
|---|
| Laser source | G2 20W: Ytterbium Fiber 0.67mjSource ↗ |
|---|---|
| Working area | G2 20W: 110mm*110mm/150mm*150mmSource ↗ |
| Marking speed | G2 20W: 15000mm/SSource ↗ |
| Precision | G2 20W: ±0.001mmSource ↗ |
| Frequency | G2 20W: 20 - 200 kHzSource ↗ |
| Electrical | G2 20W: 110-240 V 50-60HzSource ↗ |
| Power draw | G2 20W: < 120 WSource ↗ |
| Machine weight | G2 20W: 6.5KgSource ↗ |
| Rated power | 20WSource ↗ |
| Wavelength | 1064nmSource ↗ |
| Max speed | 15000mm/SSource ↗ |
| Repeatability | ±0.001mmSource ↗ |
| Cooling | Air CoolingSource ↗ |
| Machine weight | 6.5KgSource ↗ |
| Dimensions | 260 mm(L) × 440 mm(W) × 505 mm(H)Source ↗ |

Monport
LightBurn is supported.

OMTech
A desktop layout for a bench setup.

OMTech
LightBurn is supported.

ComMarker
LightBurn is supported.