Skip to content

Gweike

65/100Score12 reviews

Gweike G2 / G2 Pro / G2 Max

Fiber laser markerDesktop
Check price on Amazon

Amazon · G·WEIKE

G2 Max 50W fiber, 150 x 150 mm

Check price on Amazon
View on Amazon

Research byResearch updatedResearch method

Buying verdict

Why consider it

The G2 family has owner reports covering brass coins, jewelry and drinkware, plus a G2 Pro 30W owner who achieved consistent color with LightBurn. The current G2 20W listing specifies a 6.5 kg machine with 110 × 110 mm or 150 × 150 mm marking fields, making that version worth considering where bench space matters.

Where it falls short

The compact format has practical compromises: one G2 owner added an enclosure and larger extraction system, while a G2 Max owner returned theirs over head play, slow powered lift and extraction layout. A G2 Pro 30W owner also noted column play, although it had not affected their engraving quality.

Also compare

Compare these models

50 W applications

Metal identification & engraving

Product source ↗
Illustrative phone-style photo: modest multi-pass relief leaf pattern on brass, laser hatch visible

Metal relief details

Illustrative phone-style photo: recessed block letters on a steel coupon

Recessed steel text

Illustrative phone-style photo: brass stamp blank with an engraved inverse simple pattern

Engraved stamp faces

Published brass engraving test

Maker’s test ↗

2 hours · 1,000 mm/s · 100% power

20 W2.1 mm
30 W3.7 mm
50 W4.5 mm
AI-generated examples

Software

  1. Add artwork
  2. Set power & speed
  3. Mark / engrave
GLaserFree

Windows & Mac

LightBurn ProPaid extra

Windows & Mac

Source for Software ↗

Reviews & discussions

12 accounts

Video tests

Brass coin on G2 20W and G2 Pro 30W

Test conditions
The same reviewer compared deep engraving brass coins with the original 20W G2 and the 30W G2 Pro.
Observed result
The G2 Pro removed about 1 mm of material in just over an hour. The reviewer reports roughly two hours on the G2 for the comparison and did not give an identical-settings benchmark.

Gweike supplied the G2 Pro. The reviewer disclosed affiliate links.

Watch on YouTube · Hoffman Engineering · 6:54 ↗

G2 20W vs G2 Max 50W on brass coin relief

Test conditions
The reviewer compared deep brass coin engraving on the original 20W G2 and the 50W G2 Max, using LightBurn 3D Slice on the Max.
Observed result
The reviewer reported a deeper result in about half the time on the Max. The video gives no matched set of settings or measured depths for the two runs.

Gweike supplied the G2 Max. The reviewer disclosed affiliate links.

Watch on YouTube · Hoffman Engineering · 7:37 ↗

G2 Max 50W cut-through and heat warp

Test conditions
G2 Max 50W on 0.13 mm stainless steel shim stock.
Observed result
Four passes cut through with a clean edge in this test. The thin stock warped from the heat.

Gweike supplied the G2 Max. The reviewer disclosed affiliate links.

Watch on YouTube · Hoffman Engineering · 8:30 ↗

G2 Pro rotary marking with wide and narrow segments

Test conditions
G2 Pro 30W with the electric lift and 150 × 150 mm field. The reviewer marked a chrome socket on the roller rotary.
Observed result
Wider segments ran faster but left faint vertical joins. Narrower segments made the mark look more continuous and took longer.

Gweike supplied the machine and sponsored the video.

Watch on YouTube · TimWelds · 7:13 ↗
3Positive2Negative0Neutral7Mixed

Topics mentioned

Score

12 reviews
65 / 100

An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.

Specifications25/30
Pricing evidence12/20
After-sales clarity10/20
Owner review evidence17.6/30
Evidence quality7.6/10
Reported experience10/20
3Positive2Negative7Mixed
12 independent accounts · 10/12 fields fully sourcedMethod ↗
Share your experience with this machine
Why this score

Specifications

Laser source
2.5/2.5
Wavelength
2.5/2.5
Output power
2.5/2.5
Electrical supply
2.5/2.5
Cooling
2.5/2.5
Dimensions
2.5/2.5
Machine weight
2.5/2.5
Working area
2.5/2.5
Marking speed
2.5/2.5
Mark detail
2.5/2.5
Software
0/2.5
Focus method
0/2.5

Pricing evidence

Named configuration & power
4/4
Seller & price source
4/4
Price recency
4/4
Verified power options
0/4
Two-channel power coverage
0/4

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

  • PM_ME_UR_PUPPERINOS · Reddit ↗Mixed · Detailed use or test

    The owner documents the fault, test conditions and several troubleshooting steps; the cause remains unconfirmed.

  • gameryamen · Reddit ↗Mixed · Specific use account

    The owner describes actual setup or software use, including a practical limitation; the account is more specific than a general endorsement.

  • nokua · Reddit ↗Negative · Detailed use or test

    The owner documents the fault, test conditions and several troubleshooting steps; the cause remains unconfirmed.

  • Ok-Couple2656 · Reddit ↗Mixed · Specific use account

    The owner describes a concrete setup problem and later confirms that the adjustment or workaround worked.

  • PhiLho · Reddit ↗Negative · Specific use account

    The owner describes a specific operational problem, but the available account does not establish its cause or a completed repair.

  • SeveralCamera292 · Reddit ↗Mixed · Specific use account

    The owner describes actual setup or software use, including a practical limitation; the account is more specific than a general endorsement.

  • CryptographerVast609 · Reddit ↗Mixed · Detailed use or test

    The owner reports settings and unsuccessful aluminum engraving, then explicitly confirms that adjusting focus worked. This is a resolved setup case, not proof of a failed source.

  • No_Celery_5373 · Reddit ↗Mixed · Specific use account

    The owner gives a concrete purchase or support interaction and its outcome, with limited information about sustained engraving performance.

  • Polysculpt · Reddit ↗Positive · Brief impression

    This is a short first-person verdict with little detail about workload, settings or troubleshooting.

  • CplHicks_LV426 · Reddit ↗Positive · Specific use account

    The owner gives a concrete purchase or support interaction and its outcome, with limited information about sustained engraving performance.

  • ChrisACramer · Reddit ↗Mixed · Specific use account

    The owner describes a specific operational problem, but the available account does not establish its cause or a completed repair.

  • Albuyeh · Reddit ↗Positive · Brief impression

    This is a short first-person verdict with little detail about workload, settings or troubleshooting.

  • 2 after-sales policy areas remain unconfirmed.
Owner reviews & discussions

Reddit · 2026-09-09 · PM_ME_UR_PUPPERINOS · Self-reported use

G2: a secondhand machine lost output

MixedDetailed use or test

After several working months, a secondhand G2 stopped producing output. The owner found what looked like damage around the fiber or its bond and described slow support replies. A local repair shop considered it unrepairable. The cause and nature of the damage were not independently tested.

Read the original discussion: G2: a secondhand machine lost output

Reddit · 2026-07-14 · nokua · Self-reported use

G2 Pro: an owner reported restarting and an electrical incident

NegativeDetailed use or test

An owner said the machine restarted when firing and that USB connection sparks damaged a laptop. They were unhappy with support. These are serious user allegations; there is no independent electrical diagnosis or manufacturer confirmation of the cause.

Read the original discussion: G2 Pro: an owner reported restarting and an electrical incident
More reviews & discussions (9)

Reddit · 2026-07-14 · Ok-Couple2656 · Self-reported use

G2: a warm garage required extra airflow

MixedSpecific use account

An owner described generally stable operation, with overheating in a garage around 90°F. They reported no recurrence after adding a fan above 80°F. Their claimed business payback was not independently verified.

Read the original discussion: G2: a warm garage required extra airflow

Reddit · 2026-07-14 · PhiLho · Self-reported use

G2 Max: framing problems led an owner toward a return

NegativeSpecific use account

An owner could not get normal operation in either of two software packages. Square framing became a triangle, and supplied configuration files did not resolve it. They planned a return but acknowledged that user error had not been ruled out.

Read the original discussion: G2 Max: framing problems led an owner toward a return

Reddit · 2026-04-18 · SeveralCamera292 · Self-reported use

G2 Pro 30W: working LightBurn setup, with a loose lift column

MixedSpecific use account

An owner liked the value of their historical purchase, reported that LightBurn worked and said they could produce color consistently. They criticized the original software and loose lift column but said the play had not affected their engraving quality.

Read the original discussion: G2 Pro 30W: working LightBurn setup, with a loose lift column

Reddit · 2026-01-07 · CryptographerVast609 · Self-reported use

G2: refocusing restored engraving depth

MixedDetailed use or test

The owner first achieved deep engraving, then could only roughen the surface. Their follow-up said that correcting focus restored normal results. This was a resolved focusing problem, not confirmed source-power loss.

Read the original discussion: G2: refocusing restored engraving depth

Reddit · 2025-11-16 · No_Celery_5373 · Self-reported use

G2 Max: mechanical play and slow lift led to a return

MixedSpecific use account

An owner disliked head play, slow powered lift and the extraction layout and preferred a conventional desktop machine. They later reported a straightforward return and remained open to the brand.

Read the original discussion: G2 Max: mechanical play and slow lift led to a return

Reddit · 2025-08-29 · CplHicks_LV426 · Self-reported use

G2: regular project work and helpful lens-purchase support

PositiveSpecific use account

An owner described brass coins, slate, jewelry, drinkware and plastic-case jobs. Support helped when they bought a new lens. Their claim that the machine earned back several times its cost is self-reported and unaudited.

Read the original discussion: G2: regular project work and helpful lens-purchase support

Reddit · 2025-08-16 · ChrisACramer · Self-reported use

G2 Max: an owner asked about distortion and calibration

MixedSpecific use account

A previously working machine developed distortion near curves, and engraving appeared about 1 mm larger than its framing. The owner asked whether to recalibrate. There is no confirmed diagnosis or repair update.

Read the original discussion: G2 Max: an owner asked about distortion and calibration

Reddit · 2024-03-08 · Albuyeh · Self-reported use

G2: strong early results, with software and accessory costs

PositiveBrief impression

An early buyer liked the machine's performance but considered the supplied software average. Accessories raised their historical spend from about $1,500 to nearly $2,000. Their comment that LightBurn support was still pending reflects that time, not current compatibility.

Read the original discussion: G2: strong early results, with software and accessory costs

What specifications are published?

Rated power50 W
Working area150 x 150 mm
Full specifications

Model specifications

Machine weightNet Weight: 6.5Kg

Listing 2

Laser sourceG2 20W: Ytterbium Fiber 0.67mjSource ↗
Working areaG2 20W: 110mm*110mm/150mm*150mmSource ↗
Marking speedG2 20W: 15000mm/SSource ↗
PrecisionG2 20W: ±0.001mmSource ↗
FrequencyG2 20W: 20 - 200 kHzSource ↗
ElectricalG2 20W: 110-240 V 50-60HzSource ↗
Power drawG2 20W: < 120 WSource ↗
Machine weightG2 20W: 6.5KgSource ↗
Rated power20WSource ↗
Wavelength1064nmSource ↗
Max speed15000mm/SSource ↗
Repeatability±0.001mmSource ↗
CoolingAir CoolingSource ↗
Machine weight6.5KgSource ↗
Dimensions260 mm(L) × 440 mm(W) × 505 mm(H)Source ↗
Source ↗