Skip to content

xTool F1 Ultra vs F2 Ultra Dual

Compare the two standalone packages for metal marking, brass relief and small batches. The videos show what changes when the same design is scored or engraved.

Research byResearch updatedResearch method

Which should you shortlist?

Shortlist the F1 Ultra for standard metal marking and mixed-material personalization. Consider the F2 Ultra Dual for adjustable-pulse work or deeper metal engraving. For batches, time one complete run on your own parts, including alignment and rework.

xTool F1 Ultra vs F2 Ultra Dual
xTool F1 UltraxTool F2 Ultra Dual
Seller configurationxTool F1 Ultra 20W Fiber & Diode Dual Laser Engraver / F1 Ultra StandalonexTool F2 Ultra 60W MOPA & 40W Diode Dual Laser Engraver / Dual Laser (60W MOPA & 40W Diode) / F2 Ultra Standalone
Rated power20 WCheck with seller
Laser sources20W fiber + 20W diode60W MOPA fiber + 40W diode
Standard field220 × 220 mm220 × 220 mm
Sample to compareYour smallest lettering and one representative batchThe same file, material and acceptance criteria
Seller price$2,549Checked View seller$5,299Checked View seller
Specification sourcexTool F1 Ultra ↗xTool F2 Ultra Dual ↗

What would justify the F2 Ultra Dual?

Choose a task that your current workflow struggles to complete, such as producing a deeper engraving within a fixed shift. Compare acceptable pieces per hour on that task. If both machines meet your acceptance standard and the F1 Ultra can handle the planned volume, calculate how many orders would actually benefit from the added output.

How do you compare a production batch?

Run your smallest lettering and a typical batch using the same artwork, material and fixture. Record alignment and loading time, scan mode and repeat passes. The video comparison below shows why a single speed figure cannot describe every operation.

Which options are worth pricing together?

Quote the conveyor or rotary kit only if the job needs it. Check alignment across the useful field and repeat the trial on the tallest item you expect to run. Obtain a delivered package price with the items used in the test.

Video tests

F1 Ultra vs F2 Ultra Dual on the same file

Test conditions
The reviewer used the same artwork on both machines at their maximum speed settings and tried different scan modes.
Observed result
Scoring took 5 seconds on the F1 Ultra and 2 seconds on the F2 Ultra. In the scan-all-at-once engraving mode, the F1 Ultra took 2 min 15 sec and the F2 Ultra took 3 min 38 sec.

The video description discloses affiliate links.

Watch on YouTube · Chad’s Custom Creations · 12:55 ↗

Reflective coins on the F2 Ultra Dual conveyor

Test conditions
The reviewer ran eight reflective coins in automatic production mode with a circular design that had to align with the edge.
Observed result
Six met the reviewer’s saleability standard. One was skipped and one was visibly off-center. In a separate eight-coin batch on the work bed, with alignment checked before engraving, the reviewer reported all eight aligned.

The video description discloses affiliate links.

Watch on YouTube · Chad’s Custom Creations · 3:02 ↗