Skip to content

SFX

80/100Score4 reviews

SFX APC-300 / APC-500 Air-Cooled Pulsed Laser Cleaner

Pulsed laser cleanerHandheld
Check price on Amazon

Amazon · SFX-LYXC

APC-300 IoT / 5m fiber; appearance version varies

Check price on Amazon
View on Amazon

Research byResearch updatedResearch method

Buying verdict

Why consider it

The seller publishes pulse controls and air cooling for 300W and 500W versions. These are more useful comparison points than a wattage headline alone.

Where it falls short

Owners describe both successful stripping and finishes that resisted removal. Several accounts concern older 1.8mJ or 5mJ revisions, so they cannot validate the current 15mJ listing.

Also compare

Compare these models

300 W applications

Molds, fixtures & steel surface preparation

Product source ↗
Illustrative phone-style photo: medium steel mold block with oxidized flat face partly cleaned

Mold steel cleanup

Illustrative phone-style photo: corroded steel frame corner with a locally cleaned strip

Frame rust removal

Illustrative phone-style photo: old gray painted steel plate with localized coating removal

Painted-steel cleaning

AI-generated examples

Controls & workflow

  1. Choose coating
  2. Set scan & power
  3. Test & clean

Scan & pulse settings

Pulse energy
15 mJ (listed 300 W / 500 W IoT versions)
Pulse width
10–500 ns
Frequency
1–3000 kHz
Source for Controls & workflow ↗

Reviews & discussions

4 accounts

APC owners show useful results on wood finishes and steel, but coating type and setup matter. A 500W operator reports successful cabinet work and difficult clear coats, alongside poor distributor support. A 300W owner could not remove a porch finish. Earlier 300W accounts describe a learning curve with settings and surface quality. These posts cover different APC revisions, including 1.8mJ and 5mJ machines; they do not verify the current listing’s 15mJ configuration.

Read sources (9)

Reddit · Owner-reported case

500W cabinet work succeeds; support disappoints

A 500W APC operator reports successful maple-cabinet stripping but difficulty getting clear answers from the US distributor and SFX. In a later job, the same account estimates roughly 25 minutes for one door and about nine hours for the full job, including setup and packing.

One operator across two posts, counted once. The timing is a recalled job estimate, not a controlled cleaning-rate test; pulse energy and current SKU are not confirmed.

Read original source: 500W cabinet work succeeds; support disappoints ↗

Reddit · Owner-reported case

A 300W unit struggles with an unidentified porch coating

The owner says rust- and coating-removal settings did not affect this finish. A second poster describes better polyurethane removal with a 500W APC, but that poster identifies as an SFX distributor in another captured thread.

The coating was not chemically identified. The distributor’s experience is commercial context and receives no independent-review credit. No settings here are a universal recipe.

Read original source: A 300W unit struggles with an unidentified porch coating ↗

Reddit · Owner-reported case

A 5mJ APC-300 owner practices on steel

The owner shares square-steel-tube results and describes backing off aggressive settings to find a usable finish before taking customer work. Replies discuss uniformity and checking for remaining rust.

An expressly named 5mJ APC-300, not proof of the current 15mJ model’s performance. This is early use, not a long-term reliability test.

Read original source: A 5mJ APC-300 owner practices on steel ↗

Reddit · Owner-reported case

An APC-300 learning setup includes extraction and a generator

The owner reports good wood results after tuning settings and moving slowly, while still practicing on metal. They describe a fume extractor, compressor and generator, and later identify the purchased machine as a demo unit.

The account first writes ACG300, then explicitly identifies APC-300. The demo unit and unspecified optics are historical context, not evidence of a new machine’s condition.

Read original source: An APC-300 learning setup includes extraction and a generator ↗

Reddit · Owner-reported case

An earlier 1.8mJ APC owner questions job suitability

A new business owner says their APC-300 used a 1.8mJ Gaussian source with optics modified to flatten the beam. They question whether their equipment choices fit the work they hope to win.

Modified earlier configuration. This documents purchase expectations and the importance of pulse energy; it cannot establish the current 15mJ version’s capability. Its crosspost is not a second owner.

Read original source: An earlier 1.8mJ APC owner questions job suitability ↗

LYXC / SFX · Seller specifications · not an owner review

Current APC listing documents a different revision

The current seller page lists 15mJ, 10–500ns pulses, 300W/500W options, and several enclosure sizes. Another linked seller page warns that enclosure and cable length depend on the selected version.

Seller specifications, not an independent test. Historical owner accounts above must not be treated as measurements of this revision.

Read original source: Current APC listing documents a different revision ↗

LYXC / SFX · Manufacturer guidance

Read the seller’s written return process

LYXC’s return policy gives 30 calendar days, original-condition and packaging requirements, and buyer-paid non-quality return shipping. Customized machines are excluded.

Website policy only. It does not establish Amazon order coverage or verify service quality. The owner’s support complaint remains relevant.

Read original guide: Read the seller’s written return process ↗

LYXC / SFX · Manufacturer guidance

What the published fault-handling process includes

LYXC describes photo or video diagnosis, remote troubleshooting, and shipment of replacement parts when needed. It also offers installation guidance and online training.

Published policy, not a verified response-time or repair-turnaround test. Local workshop repair and loaner availability are not established here.

Read original guide: What the published fault-handling process includes ↗

Reddit · Owner-reported case

500W APC: cabinet job completed, some clear finishes still difficult

I_Shoot_Lasers identifies a 500W SFX APC and estimates about 25 minutes for one door, with roughly nine hours for the complete job including setup and packing. The operator also reports difficulty with certain wood finishes and clear coats. These are job-specific estimates, not a verified production rate.

The same operator also posted the maple-cabinet account. This is follow-up work from one person, not a second independent owner.

Read original source: 500W APC: cabinet job completed, some clear finishes still difficult ↗
1Positive1Negative0Neutral1Mixed1Unrated

Topics mentioned

Score

4 reviews
80 / 100

An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.

Specifications30/30
Pricing evidence12/20
After-sales clarity20/20
Owner review evidence18.3/30
Evidence quality7.7/10
Reported experience10.6/20
1Positive1Negative1Mixed1No directional verdictSmall sample
4 independent accounts · 12/12 fields fully sourcedMethod ↗
Share your experience with this machine
Why this score

Specifications

Laser source
2.5/2.5
Wavelength
2.5/2.5
Output power
2.5/2.5
Electrical supply
2.5/2.5
Cooling
2.5/2.5
Dimensions
2.5/2.5
Machine weight
2.5/2.5
Cleaning width
2.5/2.5
Pulse energy
2.5/2.5
Pulse width
2.5/2.5
Frequency
2.5/2.5
Handpiece or cable
2.5/2.5

Pricing evidence

Named configuration & power
4/4
Seller & price source
4/4
Price recency
4/4
Verified power options
0/4
Two-channel power coverage
0/4

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

  • _akuzen_ · Reddit ↗No directional verdict · Specific use account

    The named APC-300 owner describes practicing on scrap steel and changing cleaning aggressiveness. This is a concrete early-use case, but it asks for process feedback and gives no settled performance verdict or long-term result.

  • I_Shoot_Lasers · Reddit ↗Mixed · Detailed use or test

    The owner names the APC-500 and gives roughly 25 minutes per door, a nine-hour cabinet job, and 140 kHz / 180 ns settings. Successful stain removal is balanced by difficult finishes, extra extraction and compressor equipment, and light sanding. This later report is one case with the same author’s cabinet post.

  • StudentMountain8678 · Reddit ↗Negative · Specific use account

    The APC-300 owner reports no removal of a porch finish, including a detached coating flake tested on concrete at maximum power. The failed task is specific, but coating identity, full settings and the underlying cause remain unresolved; it does not establish a general machine failure rate.

  • Immediate_Run_9117 · Reddit ↗Positive · Detailed use or test

    The owner corrects the model name to APC-300, describes methodical tuning, favorable wood results with a Gaussian lens, and continued practice on metal rust and paint. Generator, extraction and compressor setup are described. Praise is grounded in actual early use, with task limits acknowledged.

  • Small review sample; reported experiences may not represent other buyers.
Owner reviews & discussions

Reddit · 2026-04-28 · _akuzen_ · Self-reported use

A 5mJ APC-300 owner practices on steel

UnratedSpecific use account

The owner shares square-steel-tube results and describes backing off aggressive settings to find a usable finish before taking customer work. Replies discuss uniformity and checking for remaining rust.

Read the original discussion: A 5mJ APC-300 owner practices on steel

Reddit · 2026-11-12 · I_Shoot_Lasers · Self-reported use

500W cabinet work succeeds; support disappoints

MixedDetailed use or test

A 500W APC operator reports successful maple-cabinet stripping but difficulty getting clear answers from the US distributor and SFX. In a later job, the same account estimates roughly 25 minutes for one door and about nine hours for the full job, including setup and packing.

Read the original discussion: 500W cabinet work succeeds; support disappoints

Reddit · 2026-11-13 · I_Shoot_Lasers · Self-reported use

500W APC: cabinet job completed, some clear finishes still difficult

MixedDetailed use or test

I_Shoot_Lasers identifies a 500W SFX APC and estimates about 25 minutes for one door, with roughly nine hours for the complete job including setup and packing. The operator also reports difficulty with certain wood finishes and clear coats. These are job-specific estimates, not a verified production rate.

Read the original discussion: 500W APC: cabinet job completed, some clear finishes still difficult
More reviews & discussions (4)

Reddit · 2026-08-22 · StudentMountain8678 · Self-reported use

A 300W unit struggles with an unidentified porch coating

NegativeSpecific use account

The owner says rust- and coating-removal settings did not affect this finish. A second poster describes better polyurethane removal with a 500W APC, but that poster identifies as an SFX distributor in another captured thread.

Read the original discussion: A 300W unit struggles with an unidentified porch coating

Reddit · 2026-03-13 · Immediate_Run_9117 · Self-reported use

An APC-300 learning setup includes extraction and a generator

PositiveDetailed use or test

The owner reports good wood results after tuning settings and moving slowly, while still practicing on metal. They describe a fume extractor, compressor and generator, and later identify the purchased machine as a demo unit.

Read the original discussion: An APC-300 learning setup includes extraction and a generator

Reddit · 2026-03-13 · Sufficient_Age7851 · Context or creator report

An earlier 1.8mJ APC owner questions job suitability

UnratedBrief impression

A new business owner says their APC-300 used a 1.8mJ Gaussian source with optics modified to flatten the beam. They question whether their equipment choices fit the work they hope to win.

Read the original discussion: An earlier 1.8mJ APC owner questions job suitability

What specifications are published?

Rated power300 W
Full specifications

Model specifications

Power draw1.5kW/ 2kW
Gross weight50kg-73kg

Listing 2

Packing dimensions700*500*770mmSource ↗
Rated power300 W / 500 WSource ↗
Wavelength1070 ± 10 nm / 1064 nmSource ↗
Pulse energy15 mJ (listed 300 W / 500 W IoT versions)Source ↗
Pulse width10–500 nsSource ↗
Frequency1–3000 kHzSource ↗
Fiber cable5 m / 10 m, depending on packageSource ↗
Scan width0–100 mm (300 W) / 0–120 mm (500 W)Source ↗
CoolingAir-cooledSource ↗
ElectricalAC 110–220 V ± 10%Source ↗
Dimensions630 × 425 × 630 mm / 575 × 390 × 510 mm, depending on versionSource ↗
Machine weight31–57 kg, depending on versionSource ↗

Listing 3

Laser sourcePulsed fiber laserSource ↗
Source ↗