Working area
Published model range
Larger field: 4× the area
ComMarker
77/100Score5 reviewsManufacturer store · store.commarker.com
USD · tax & shipping extra · Recorded 2026-11-19
B6 MOPA 20W / B6 MOPA Basic Bundle
$2,459Research byPickaLaserResearch updatedResearch method
The B6 JPT MOPA combines autofocus with a listed 150 × 150 mm field and optional 300 × 300 mm lens. Its adjustable pulse-width range distinguishes it from the standard B6 fiber model. Owners describe prompt support, and one 60W owner reported expected stainless-steel results after correcting the focus distance.
Autofocus does not remove the setup learning curve: one 60W machine initially focused at about 182 mm instead of the manual’s 233 mm. Another owner praised support but still could not achieve color on 304 stainless steel. A positive three-month ownership report offers limited evidence about sustained production or long-term reliability.
Controlled-pulse metal marking & engraving



Published model range
Larger field: 4× the area
Cooling not published
Windows only
Windows & Mac
ComMarker supplied the machine. The reviewer disclosed affiliate links.
Watch on YouTube · Hoffman Engineering · 7:33 ↗The video description discloses affiliate links.
Watch on YouTube · JT Makes It · 3:42 ↗The video description discloses affiliate links.
Watch on YouTube · JT Makes It · 4:01 ↗The video description discloses affiliate links.
Watch on YouTube · JT Makes It · 3:02 ↗An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.
Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.
Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.
The owner describes a concrete setup problem and later confirms that the adjustment or workaround worked.
The owner supplies material-test settings and confirms that correcting the autofocus distance from about 182 mm to 233 mm restored the expected operation.
This is a short first-person verdict with little detail about workload, settings or troubleshooting.
The owner states a period of use and an overall verdict, but supplies little information about materials, settings or completed jobs.
The owner gives a concrete purchase or support interaction and its outcome, with limited information about sustained engraving performance.
Reddit · 2026-05-17 · Scottg216 · Self-reported use
A new owner asked why there was only one red focusing dot. Support replied promptly and explained that this was the B6 MOPA's intended design. The question was resolved and does not establish a hardware fault.
Read the original discussion: B6 MOPA: the single focusing dot was intentionalLightBurn Software Forum · 2026-04-29 · BOARGLOBAL · Self-reported use
A new owner found single-pass stainless-steel results very weak. Autofocus was set around 182 mm while their manual specified 233 mm. After adjusting to 233 mm, they reported performance consistent with the advertised result.
Read the original discussion: B6 60W MOPA: correcting focus restored the expected resultReddit · 2026-02-12 · who_is_flip · Self-reported use
The same owner praised the B6 and prompt support, yet said elsewhere that they had never achieved color marking on 304 stainless steel. Both experiences belong to one owner and should be read together.
Read the original discussion: B6 MOPA: good support, but stainless-steel color remained difficultReddit · 2025-12-07 · FrezzZ0 · Self-reported use
An owner said they bought the machine on Amazon and had used it for about three months without problems. This is a short ownership account, without measured runtime or a repair case.
Read the original discussion: B6 60W MOPA: three months without reported troubleReddit · 2024-12-25 · DA98550 · Self-reported use
The owner reported a small shipping delay and no complaints about the machine itself. Moving from an Epilog CO2 system took learning, with limited guidance. They noted that autofocus could be overridden and were already considering 100W for their needs.
Read the original discussion: B6 MOPA: a working machine, with a learning curve| Rated power | 20 W |
|---|
| Working area | 5.9“ × 5.9” (150mm × 150mm); 11.8“ × 11.8” (300mm × 300mm) (With Optional Lens)Source ↗ |
|---|---|
| Marking speed | 15000mm/sSource ↗ |
| Spot size | 0.015mmSource ↗ |
| Precision | 0.001mmSource ↗ |
| Focus method | Auto FocusSource ↗ |
| Software | EZCAD / LightburnSource ↗ |
| Machine weight | 29.7 lbs (13.5 kg)Source ↗ |
| Electrical | 100-230VSource ↗ |
| Frequency | 1-4000 kHzSource ↗ |
| Pulse width | 20W / 30W: 2–350 ns; 60W: 2–500 nsSource ↗ |
| Pulse energy | 20W / 30W: 0.8 mJ; 60W: 2 mJSource ↗ |
| Laser source | JPT MOPA Fiber LaserSource ↗ |
| Rated power | 20W / 30W / 60WSource ↗ |
| Wavelength | 1064 nmSource ↗ |

OMTech
A desktop layout for a bench setup.

OMTech
The listed working area is 150 × 150 mm.

Monport
LightBurn is supported.

OMTech
The listed working area is 175 × 175 mm.