Skip to content

Twotrees

54/100Score4 reviews

Twotrees TTS-55 Pro

Diode laser engraverDesktop
Check price on Amazon

Amazon · Twotrees-US Official Store

A budget open-frame engraver with a 300 × 300 mm area and an air-assist nozzle. A nozzle is not an air pump; confirm the pump and protective setup you will need.

TTS-55 Pro; 5.5W; air-assist nozzle

Check price on Amazon
View on Amazon

Research byResearch updatedResearch method

Buying verdict

Why consider it

For patient photo and small craft engraving, the 5.5W TTS-55 Pro has a listed 300 × 300 mm bed and LightBurn/LaserGRBL support. One anonymous seller-hosted reviewer reported good photo engraving after tuning over three months; treat that as an individual account rather than a repeatable benchmark.

Where it falls short

Cutting can demand patience: that reviewer needed at least five passes through their thin plywood, without precise thickness or settings. Two separate owners reported early weak or absent laser output, including one completed refund. Neither case confirms the failed component or establishes a failure rate for the TTS-55 Pro.

Also compare

  • SCULPFUN S9 — Its official page lists a larger 410 × 415 mm bed for similar low-power diode engraving.
  • ACMER S2 12W — A listed 12W diode with the same 300 × 300 mm working-area format.
Compare these models

5.5 W applications

Wood, leather & coated-material engraving

Product source ↗
AI-generated application illustration: a pale plywood coaster with brown fern line art

Wood line art

AI-generated application illustration: vegetable-tanned leather with a dark leaf outline

Leather details

AI-generated application illustration: a black painted aluminum tag with a pale geometric surface mark; no metal recess

Painted-metal labels

Wood & coated materials; not clear-acrylic cutting.AI-generated examples

Software

  1. Add artwork
  2. Set power & speed
  3. Mark / engrave
LaserGRBLFree

Windows only

LightBurnPaid extra

Windows & Mac

Source for Software ↗

Reviews & discussions

4 accounts

Owner evidence is mixed: a three-month user liked photo engraving after tuning but needed at least five passes for thin plywood. Separate owners report early weak/no laser output, including one Amazon refund. A curve-engraving complaint behaved differently in LaserGRBL, so it is not confirmed as a hardware fault.

Read sources (4)

LightBurn Software Forum · Owner-reported case

Curves failed in LightBurn; another software path differed

The owner could not engrave circles or text in LightBurn but did not see the same behavior in LaserGRBL. Replies questioned the LightBurn installation; no completed repair or confirmed cause appears.

Explicit TTS-55 Pro account with comparative software testing. Community suspicions are not proof of a machine defect or a software diagnosis.

Read original source: Curves failed in LightBurn; another software path differed ↗

TwoTrees owner review · Owner-reported case

Good photo engraving, slow thin-plywood cuts

After three months the user says engraving works well once settings are tuned. Cutting their thin plywood took at least five passes, and photo engraving still needed time with the 5.5W head.

Current TTS-55 Pro product page, review UUID 40bb3740-8528-481d-a15d-1cbb6db27587. Anonymous and not purchase-verified; the reviewer’s thickness wording is imprecise and is not promoted to a cutting specification.

Read original source: Good photo engraving, slow thin-plywood cuts ↗

Reddit · Owner-reported case

Motion continued after the laser stopped emitting

The new owner says the laser worked three times and then stopped emitting while the gantry still moved. A follow-up notes a missing green indicator. Contacting support is suggested, but no fix is confirmed.

The original post names TTS 55 Pro. Other comments with unspecified or non-Pro models are not counted; this isolated case does not establish a failure rate.

Read original source: Motion continued after the laser stopped emitting ↗

Reddit · Owner-reported case

Weak output ended in a refund; replacement not yet tested

After assembly the beginner could not obtain useful laser strength despite trying online fixes. They returned it to Amazon, received a refund and ordered from TwoTrees; the thread does not report the new machine’s result.

Explicit TTS-55 Pro owner and completed marketplace refund. Reports about other people’s modules and the separate TTS20 comment are not additional cases.

Read original source: Weak output ended in a refund; replacement not yet tested ↗
0Positive2Negative0Neutral2Mixed

Topics mentioned

Score

4 reviews
54 / 100

An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.

Specifications27.5/30
Pricing evidence0/20
After-sales clarity15/20
Owner review evidence11.8/30
Evidence quality6.8/10
Reported experience5/20
2Negative2MixedSmall sample
4 independent accounts · 11/12 fields fully sourcedMethod ↗
Share your experience with this machine
Why this score

Specifications

Laser source
2.5/2.5
Wavelength
2.5/2.5
Output power
2.5/2.5
Electrical supply
2.5/2.5
Cooling
0/2.5
Dimensions
2.5/2.5
Machine weight
2.5/2.5
Working area
2.5/2.5
Marking speed
2.5/2.5
Mark detail
2.5/2.5
Software
2.5/2.5
Focus method
2.5/2.5

Pricing evidence

Named configuration & power
0/4
Seller & price source
0/4
Price recency
0/4
Verified power options
0/4
Two-channel power coverage
0/4

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

  • friend4all · LightBurn Software Forum ↗Mixed · Specific use account

    The owner supplies comparison images and tests LightBurn output against LaserGRBL, naming the TTS-55 Pro. Replies suspect an unofficial software build, but the owner does not confirm the diagnosis or final fix.

  • The anonymous seller-hosted text states three months of 5.5W use and contrasts photo engraving with at least five passes on thin plywood. It gives a useful material-specific limit, but no speed/power settings and no verified-buyer badge.

  • casiomarlim · Reddit ↗Negative · Specific use account

    The named TTS-55 Pro owner reports three successful uses followed by no beam while motion remains active, and follows up about the module indicator lights. The thread has no verified repair outcome or identified failed component.

  • North-Register-5788 · Reddit ↗Negative · Specific use account

    The TTS-55 Pro buyer describes weak output after assembly, attempted online fixes and an actual Amazon refund, followed by a new order. The refund outcome is concrete; the claimed defective module is not technically diagnosed and the replacement was still pending.

  • 1 after-sales policy areas remain unconfirmed.
  • Small review sample; reported experiences may not represent other buyers.
Owner reviews & discussions

LightBurn Software Forum · 2025-03-24 · friend4all · Self-reported use

Curves failed in LightBurn; another software path differed

MixedSpecific use account

The owner could not engrave circles or text in LightBurn but did not see the same behavior in LaserGRBL. Replies questioned the LightBurn installation; no completed repair or confirmed cause appears.

Read the original discussion: Curves failed in LightBurn; another software path differed

TwoTrees owner review · 2026-09-11 · Self-reported use

Good photo engraving, slow thin-plywood cuts

MixedSpecific use account

After three months the user says engraving works well once settings are tuned. Cutting their thin plywood took at least five passes, and photo engraving still needed time with the 5.5W head.

Read the original discussion: Good photo engraving, slow thin-plywood cuts

Reddit · casiomarlim · Self-reported use

Motion continued after the laser stopped emitting

NegativeSpecific use account

The new owner says the laser worked three times and then stopped emitting while the gantry still moved. A follow-up notes a missing green indicator. Contacting support is suggested, but no fix is confirmed.

Read the original discussion: Motion continued after the laser stopped emitting
More reviews & discussions (1)

Reddit · 2024-12-31 · North-Register-5788 · Self-reported use

Weak output ended in a refund; replacement not yet tested

NegativeSpecific use account

After assembly the beginner could not obtain useful laser strength despite trying online fixes. They returned it to Amazon, received a refund and ordered from TwoTrees; the thread does not report the new machine’s result.

Read the original discussion: Weak output ended in a refund; replacement not yet tested

What specifications are published?

Rated power5.5 W
Working area300 × 300 mm
SoftwareLightBurn
Dimensions10 × 4.97 × 7 inches
Full specifications

TTS-55 Pro; 5.5W; air-assist nozzle

Working area300 × 300 mm
SoftwareLightBurn
Rated power (quoted module)5500 mW (5.5W)
Dimensions10 × 4.97 × 7 inches

Listing 2

Laser source5.5W diode laserSource ↗
Rated power5.5 WSource ↗
Electrical100–240 V AC, 50/60 Hz; adapter output 12 V DC / 4 ASource ↗
Dimensions570 × 510 × 150 mmSource ↗
Machine weight3.2 kg (current product page)Source ↗
Working area300 × 300 mmSource ↗
Max speed30000 mm/minSource ↗
Spot size0.08 × 0.08 mmSource ↗
SoftwareLightBurn / LaserGRBLSource ↗

Listing 3

Wavelength445 ± 5 nmSource ↗
Focus methodManual height adjustment with fixed-length columnSource ↗
Source ↗