Working area
Selected field
SFX
63/100Score4 reviewsManufacturer store · sfxindustrial.com
USD · tax & shipping extra · Recorded 2026-11-19
50W / 110mm*110mm / None
$4,499Research byPickaLaserResearch updatedResearch method
This sfxindustrial.com listing identifies a 50W JPT LP+ source with a fixed 200 ns pulse width and optional marking fields from 110 × 110 mm to 300 × 300 mm. Historical SFX JPT 50W owners reported working flat-material marking and good factory calibration, although their exact chassis and source revision were not established.
The historical ownership record is mixed: one SFX JPT 50W owner struggled with rotary gaps despite improvements, and another reported sudden output loss without a confirmed diagnosis or repair. These incidents cannot establish a defect in today’s LP+ listing. Its fixed pulse width also makes it a different proposition from an adjustable-pulse MOPA machine.
Metal identification & engraving



Selected field
Air-cooled
Windows only
Sawmill Creek · Owner-reported case
The owner names an SFX JPT 50W with EZCAD 2.14.7. Flat marking worked, while rotary work showed split gaps and wobbly hatch lines. After changing settings, the follow-up reports improvement that remained unacceptable, with no final successful repair.
Historical SFX JPT 50W configuration; current retail revision and bundle unverified.
Read original source: SFX JPT 50W rotary split gaps ↗An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.
Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.
Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.
The owner documents the fault, test conditions and several troubleshooting steps; the cause remains unconfirmed.
The owner describes a concrete setup problem and later confirms that the adjustment or workaround worked.
The owner names the SFX JPT 50W and EZCAD 2.14.7, describes rotary split gaps and hatch wobble, and follows up that slower settings improved the result but remained unacceptable; flat marking worked.
The original account could not be reread in this audit. Its previous verdict is retained, but detailed content quality is not verified.
LightBurn Software Forum · 2023-07-20 · cloxart (gianluca gava) · Self-reported use
An SFX customer said their 50W JPT fiber had engraved and cut anodized aluminum labels, including 100 the previous day, then produced very weak or absent marking in both LightBurn and EZCAD. The author confirmed buying it from SFX in November 2022. No diagnosis, repair outcome, exact model, lens, or chassis was established; this is one historical owner incident.
Read the original discussion: 50W JPT owner reports sudden power loss after label productionLightBurn Software Forum · 2023-05-26 · Redicj (Jonny) · Self-reported use
A new SFX 50W fiber owner was concerned by Windows-only driver instructions despite advertised LightBurn compatibility. The same owner later confirmed operation on a MacBook. The post gives no fix steps, source generation, lens, chassis, or current SKU, so this is historical 50W family evidence only.
Read the original discussion: 50W owner confirms MacBook operation after setup uncertaintySawmill Creek · 2021-07-31 · Les Dean · Self-reported use
The owner names an SFX JPT 50W with EZCAD 2.14.7. Flat marking worked, while rotary work showed split gaps and wobbly hatch lines. After changing settings, the follow-up reports improvement that remained unacceptable, with no final successful repair.
Read the original discussion: SFX JPT 50W rotary split gapsBladeForums · 2021-03-04 · P.Brewster · Self-reported use
In a discussion started by a prospective 60W buyer, a different participant described owning a 50W JPT fiber bought the previous summer, then identified its brand as SFX and praised its factory calibration. The owner described fixed pulse width rather than a fully adjustable MOPA source. Chassis, lens and current catalog SKU were not identified.
Read the original discussion: 50W JPT owner says SFX arrived calibrated and ready to use| Rated power | 50 W |
|---|---|
| Working area | 110mm*110mm |

Haotian
LightBurn is supported.

SFX
The marking head and source cabinet are separate.

SFX
LightBurn is supported.

SFX
LightBurn is supported.