Working area
Published model range
20" x 28" | 20" x 28" | 20" x 28" | 20" x 28"
OMTech
58/100Score4 reviewsManufacturer store · omtech.com
OMTech Maker AF2028-80 90W CO2 Laser Cutter and Engraver with 20" x 28" Working Area and Autofocus / Essentials Bundle
Check seller priceResearch byPickaLaserResearch updatedResearch method
The AF2028 family has useful longer-use accounts for a 20 × 28 in. CO2 workflow. An owner explicitly identifying an older 80W unit reports roughly two years of reliable use; another identifies an AF2028-60 in a fleet averaging about two years. Keep those configurations distinct from the currently marketed 90W AF2028-80.
One AF2028-80 owner measured a 35 mm acrylic test at 35 × 34.95 mm and was still seeking adjustment; this is a self-reported result, not a tolerance specification. Another owner needed a replacement control-board fan, supplied overnight. A fleet owner recommends a chiller, stronger air assist and inline extraction, so assess the complete installation.
Wood, acrylic & non-metal workshop projects



Published model range
20" x 28" | 20" x 28" | 20" x 28" | 20" x 28"
Water-cooled
Windows only
Windows & Mac
An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.
Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.
Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.
The owner describes actual materials, settings or job results in enough detail to judge the reported use.
The owner describes the failure, troubleshooting and a confirmed repair or replacement outcome.
The author identifies their own machine and a concrete use or ownership experience, without a detailed test protocol.
The owner states a period of use and an overall verdict, but supplies little information about materials, settings or completed jobs.
Reddit · 2026-10-09 · Suggestion_Alarmed · Self-reported use
A recent AF2028-80 buyer reports a 35mm test cut measuring 35mm by 34.95mm in 1/8-inch cast clear acrylic after kerf and mirror checks. They seek tighter tolerance; no calibrated independent measurement or final adjustment result is supplied. Exact tube rating, revision and bundle are unconfirmed beyond the model designation.
Read the original discussion: AF2028-80 owner describes acrylic dimension checksReddit · 2025-05-09 · Accomplished_Plum281 · Self-reported use
In a thread naming the AF2028-80 marketed as 90W, an owner says they have that exact laser and it performs as expected. They report a defective control-board cooling fan and an overnight replacement from support. Model association depends on the reply to the linked Canadian listing; exact bundle and revision are not independently confirmed.
Read the original discussion: AF2028 owner reports quick replacement of defective control fanReddit · 2024-04-17 · Adaur981 · Self-reported use
An owner identifies an AF2028-60 and two MF2028-100 machines, averaging roughly two years of operation. They like the value and recommend a chiller, upgraded air assist and inline exhaust. Their fleet statement supports these named configurations only; it does not establish the 90W MF2028 variant or exact bundles.
Read the original discussion: Owner identifies AF2028-60 and two MF2028-100 machinesReddit · 2023-08-22 · Knighthawk2800 · Self-reported use
An owner explicitly identifies an 80W AF2028 and says it has remained reliable during about two years of substantial use. The comment gives no maintenance log, workload measurement, accessory list or hardware revision. It does not establish reliability for the 60W or later 90W configurations.
Read the original discussion: AF2028 80W owner reports two years without issues| Rated power | 90 W |
|---|
| Rated power | 60W | 90W | 90W | 100W |
|---|---|
| Working area | 20" x 28" | 20" x 28" | 20" x 28" | 20" x 28" |
| Machine weight | 249 lb. | 227.1 lb. | 258 lb. | 251 lb. |

SFX
The listed working area is 400 × 600 mm. Plan for water-cooling setup and maintenance.

Cloudray
LightBurn is supported.

xTool
Autofocus handles the focusing step.

SFX
The listed working area is 400 × 400 mm. Plan for water-cooling setup and maintenance.