Skip to content

Haotian

65/100Score6 reviews

Haotian UV Laser Marking Machine (5/10/15W)

UV laser markerDesktop
$5,400

Manufacturer store · haotianlasers.com

View seller

USD · tax & shipping extra · Recorded 2026-11-19

UV Laser Marking Machine 5W / 70x70 mm _0, D 60 Rotary (for Rings & Bracelets)_0 (select on seller page)

$5,400
View seller

Research byResearch updatedResearch method

Buying verdict

Why consider it

The current 15W page specifies a JPT SEAL-355-15S source, an included S&A chiller and EZCAD2 with LightBurn compatibility. Owner evidence mainly concerns 5W machines: examples include layered relief work and an early report of daily use without problems for three weeks. Keep those experiences separate from the current 15W specification.

Where it falls short

Two 5W owners reported inconsistent glass work; one found curved ornaments difficult because of shallow focus and uneven glass. Another described a prolonged troubleshooting process followed by a reported source-repair recommendation and business downtime. These are specific 5W experiences, not proof of a universal glass limitation or a fault in the current 15W model.

Also compare

  • xTool F2 Ultra UV — Compare its 5W UV, autofocus and 200 × 200 mm surface field for an integrated glass-and-plastic workflow.
  • ComMarker Omni X UV Laser Engraver — Compare its 6W/12W UV options and autofocus, with different working fields for each power.
Compare these models

5 W applications

Fine surface marking on glass & suitable plastics

Product source ↗
Illustrative phone-style photo: small frosted lettering on the outside of a clear glass sample

Small glass lettering

Illustrative phone-style photo: precise subtle dark ID on a white electronic connector housing

Electronics housings

Illustrative phone-style photo: a fine gray line logo on a pale rigid polymer disk

Fine line logos

AI-generated examples

Software

  1. Add artwork
  2. Set power & speed
  3. Mark / engrave
EZCAD2Included

Windows only

LightBurn ProPaid extra

Windows & Mac

Source for Software ↗

Owner feedback

6 accounts
2Positive1Negative0Neutral2Mixed1Unrated

Topics mentioned

Score

6 reviews
65 / 100

An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.

Specifications15/30
Pricing evidence12/20
After-sales clarity20/20
Owner review evidence18.2/30
Evidence quality7.1/10
Reported experience11.1/20
2Positive1Negative2Mixed1No directional verdict
6 independent accounts · 6/12 fields fully sourcedMethod ↗
Share your experience with this machine
Why this score

Specifications

Laser source
2.5/2.5
Wavelength
2.5/2.5
Output power
2.5/2.5
Electrical supply
0/2.5
Cooling
2.5/2.5
Dimensions
0/2.5
Machine weight
0/2.5
Working area
0/2.5
Marking speed
0/2.5
Mark detail
2.5/2.5
Software
2.5/2.5
Focus method
0/2.5

Pricing evidence

Named configuration & power
4/4
Seller & price source
4/4
Price recency
4/4
Verified power options
0/4
Two-channel power coverage
0/4

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

  • Highland_Rim_Studio · Reddit ↗Negative · Specific use account

    The owner names the material and a concrete result or limitation; this does not establish performance on other materials.

  • PanRallao79 · Reddit ↗Mixed · Specific use account

    The owner names the material and a concrete result or limitation; this does not establish performance on other materials.

  • Bulldog · LightBurn Software Forum ↗No directional verdict · Specific use account

    The owner describes actual materials, settings or job results in enough detail to judge the reported use.

  • DrewPeacock76 · Reddit ↗Positive · Specific use account

    The owner gives a concrete purchase or support interaction and its outcome, with limited information about sustained engraving performance.

  • Jthomas · LightBurn Software Forum ↗Mixed · Specific use account

    The owner describes a concrete setup problem and later confirms that the adjustment or workaround worked.

  • JoeSpanier · LightBurn Software Forum ↗Positive · Brief impression

    This is a short first-person verdict with little detail about workload, settings or troubleshooting.

Owner reviews & discussions

Reddit · 2026-08-06 · Highland_Rim_Studio · Self-reported use

5W UV: curved glass was difficult to keep consistent

NegativeSpecific use account

An owner bought a 5W UV for glass ornaments and frames. They found that shallow focus and uneven glass made results inconsistent and preferred their sandblasting process for curved pieces. The post does not establish a machine fault or a universal limit for 5W UV.

Read the original discussion: 5W UV: curved glass was difficult to keep consistent

Reddit · 2026-08-01 · PanRallao79 · Self-reported use

5W UV: inconsistent glass work and a difficult repair process

MixedSpecific use account

An owner reported inconsistent glass work and about a year of parameter advice before being told the source needed repair. Returning it meant business downtime, with no backup offered. They also reported an unanswered lift-button problem. The diagnosis is relayed by the owner, without an independent test.

Read the original discussion: 5W UV: inconsistent glass work and a difficult repair process

LightBurn Software Forum · 2026-07-02 · Bulldog · Self-reported use

5W UV: relief examples with an F330 lens

UnratedSpecific use account

An owner shared layered relief work and explicitly identified a 5W UV machine and F330 lens. Processing time, yield and service experience were not provided; the examples do not establish a performance ceiling.

Read the original discussion: 5W UV: relief examples with an F330 lens
More reviews & discussions (3)

Reddit · 2026-05-27 · DrewPeacock76 · Self-reported use

5W UV: an encouraging first three weeks

PositiveSpecific use account

The owner reported good packing, early delivery and helpful communication. Their new UV machine had run daily for about three weeks without problems. This is an early-use account.

Read the original discussion: 5W UV: an encouraging first three weeks

LightBurn Software Forum · 2025-03-30 · Jthomas · Self-reported use

5W UV: axis calibration corrected a rotated image

MixedSpecific use account

A new owner had good early results but the design was rotated 90 degrees. They followed the forum's direction-calibration and axis advice and twice confirmed that the problem was fixed.

Read the original discussion: 5W UV: axis calibration corrected a rotated image

LightBurn Software Forum · 2025-03-15 · JoeSpanier · Self-reported use

Haotian UV: a positive EZCAD2 ownership account

PositiveBrief impression

A user said their Haotian UV machine had worked normally and specifically mentioned an EZCAD2 control board. They did not identify the power, source generation or long-term runtime.

Read the original discussion: Haotian UV: a positive EZCAD2 ownership account

What specifications are published?

Rated power5 W
Working area70x70 mm
Full specifications

Model specifications

Listed warranty18 months full coverage

UV Laser Marking Machine 15W / 70x70 mm _0, D 60 Rotary (for Rings & Bracelets)_0 (select on seller page)

Pulse widthLess than 15 ns at 60 kHzSource ↗
Frequency40 kHz to 300 kHzSource ↗
Power drawLess than 250 W average for the laser, plus the chillerSource ↗
Laser sourceJPT SEAL-355-15S (premium S-series, sealed water-cooled)Source ↗
Rated powerGreater than 15 W at 60 kHzSource ↗
Wavelength355 nm (ultraviolet, cold marking)Source ↗
Min. line widthLess than 0.01 mm (10 micrometers)Source ↗
CoolingWater cooled, S&A industrial chiller included (500 W cooling capacity, water kept at 25 °C)Source ↗
SoftwareEZCad 2 (included), LightBurn compatibleSource ↗
Source ↗