Welding capacity
Published specification
0.2–5 mm (seller-listed range)
Gweike
53/100Score3 reviewsManufacturer store · gweikecloud.com
USD · tax & shipping extra · Recorded 2026-11-19
6 in 1 CNC Laser Cutting Machine and Fiber Laser Welding Machine / M3 PRO
$11,499Research byPickaLaserResearch updatedResearch method
Consider the M3 when combining metal cutting and CO₂ work is central to the purchase. Gweike lists a 1,200W fiber source alongside 80W CO₂ in PRO or 130W in ULTRA. M-series owners describe working sheet-metal cuts and regular CO₂ use, giving those functions more practical support than the advertised welding capability currently receives from these reports.
Owner reports do not demonstrate completed welding or automated weld quality. One operator sets welding parameters at the source, with software handling the path. An M3 Ultra owner lacked needed MLaser features; LightBurn staff’s September 2026 update gave no integration date. Another owner recovered from an update-related head collision by reverting software before reporting accurate cuts.
Steel fabrication, brackets & sheet-metal joints
Preview · package power unconfirmed



Published specification
0.2–5 mm (seller-listed range)
Cooling not published
M-Series owners describe software limitations and an update-related head collision, alongside later regular CO2 use and accurate metal cuts. LightBurn staff said integration was unavailable in their September update. These named-system accounts do not verify welding strength or the separate MCore and handheld-only packages.
LightBurn Software Forum · Owner-reported case
Well_Lit_Woods identifies an M3 Ultra and asks how to connect it after LightBurn fails to recognize the controller.
A named M3 Ultra owner; the report does not establish the behavior of the M800/M1200 handheld-only packages.
Read original source: M3 Ultra: LightBurn connection fails ↗LightBurn Software Forum · Software-team explanation
Dominic says the team has M-Series hardware for development but no release timeline. Colin confirms the intent to support it.
Software-team statements dated September 2026, not a promise of current compatibility or a separate owner review.
Read original source: LightBurn staff explain the integration gap ↗LightBurn Software Forum · Owner-reported case
Well_Lit_Woods says MLaser lacked features needed for work and LightBurn could not identify the M3 Ultra controller. A LightBurn team member replied that M-Series support was unavailable then, with no release timeline. The owner acknowledged the limitation; the thread does not show a successful connection.
This concerns the named M3 Ultra in April 2026. Development intent does not establish compatibility with the current model.
Read original source: M3 Ultra: supplied software lacked features; LightBurn connection failed ↗Reddit · Owner-reported case
Trekker29 initially waited for delivery, then reported a head collision after a software update and returned to the supplied software. Later updates praise accurate metal cuts and regular CO2 work, while noting nitrogen consumption and limited fiber use.
This is the M-series 6-in-1 family, not the separate MCore. Delivery-stage questions are separated from post-delivery operation; the thread does not validate welding capability.
Read original source: Gweike 6-in-1: software crash, then regular use ↗An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.
Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.
Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.
An M-series operator explains working sheet-metal cuts and the need to set welding parameters at the source rather than in MLaser; battery welding is a future goal, not a completed test.
The M3 Ultra owner describes missing work features and failed LightBurn detection; LightBurn staff separately confirm no support or timeline. There is no positive welding-performance result.
Updates separate ordering from received-machine use, describe a software-related head crash, a spare ceramic and software rollback, then clean accurate cuts and regular CO2 use; completed laser welding is not demonstrated.
Reddit · 2026-07-24 · HennaceTheMennace · Self-reported use
An M Series user said sheet cutting worked, while MLaser felt unfinished. Welding parameters had to be set on the source unit, with software handling the path. Battery welding was still a plan, not a demonstrated result.
Read the original discussion: M Series: cutting worked, but welding setup was cumbersomeLightBurn Software Forum · 2026-04-04 · Well_Lit_Woods · Self-reported use
Well_Lit_Woods says MLaser lacked features needed for work and LightBurn could not identify the M3 Ultra controller. A LightBurn team member replied that M-Series support was unavailable then, with no release timeline. The owner acknowledged the limitation; the thread does not show a successful connection.
Read the original discussion: M3 Ultra: supplied software lacked features; LightBurn connection failedReddit · Trekker29 · Self-reported use
Trekker29 initially waited for delivery, then reported a head collision after a software update and returned to the supplied software. Later updates praise accurate metal cuts and regular CO2 work, while noting nitrogen consumption and limited fiber use.
Read the original discussion: Gweike 6-in-1: software crash, then regular useReddit · 2026-11-05 · Context or creator report
An owner cutting thin brass with an 800W 6-in-1 reported parts sticking, local remelting and raised material contacting the head. Replies suggested checking assist gas. No final owner-confirmed process solution is recorded.
Read the original discussion: M Series 800W: thin brass was hard to separate cleanlyLightBurn Software Forum · 2026-09-14 · Dominic / Colin · Context or creator report
In September 2026, LightBurn staff again said there was no update to announce for M Series integration. CO2, high-power fiber and gas-control workflows added complexity. This is a software-status discussion, not a machine performance test.
Read the original discussion: M Series: the archived software reply gave no integration dateLightBurn Software Forum · 2026-04-04 · Well_Lit_Woods / Colin · Context or creator report
A user said MLaser lacked functions they needed. LightBurn staff said in April 2026 that M Series support was not yet available and that they had bought a machine to investigate, without a release date. Compatibility should be checked against the current software version.
Read the original discussion: M3 Ultra: software limitations and no confirmed LightBurn support| Laser source | 1,200W fiber laser + 80W CO₂ (PRO) or 130W CO₂ (ULTRA) |
|---|---|
| Working area | 620 × 620mm (PRO); 1,380 × 920mm (ULTRA) |
| Cooling | Air cooling + water cooling |
| Rated power | M3 PRO: 1200W fiber + 80W CO2; M3 ULTRA: 1200W fiber + 130W CO2Source ↗ |
|---|---|
| Welding capability | 0.2–5 mm (seller-listed range)Source ↗ |
| Electrical | 200–240 V AC, 50/60 HzSource ↗ |
| Wavelength | 1080 ±10 nm (fiber laser)Source ↗ |
| Machine weight | M3 PRO: 300 kg; M3 ULTRA: 610 kgSource ↗ |
| Fiber cable | 8 mSource ↗ |
| Process gas | Nitrogen / Argon / AirSource ↗ |

SFX
The machine uses an automated platform.

SFX
The machine uses an automated platform. Allow space and upkeep for an external water chiller.

SFX
The machine uses an automated platform.

SFX
The machine uses an automated platform.