Working area
Published specification
Not published
ATOMSTACK
60/100Score4 reviewsAmazon · ATOMSTACK Official Store
A physical switch selects 24W or 48W operation on the same machine. It remains an open-frame laser, so plan protection and extraction around the work area.
A40 Pro V2; switchable 24W / 48W; auto air assist
Check price on AmazonResearch byPickaLaserResearch updatedResearch method
The A20 Pro V2 offers a published 400 × 365 mm bed and 20W diode with LightBurn support for coaster, keychain and sheet projects. An owner liked the early engraving results. The separate A40 Pro V2 is listed at 48W/24W with autofocus; those specifications are not A20 owner findings.
A20 V2 owners describe jig-placement work, unresolved X-axis ghosting and, in one case, a damaged lens after roughly 30–40 hours alongside weak plywood/MDF cutting. These reports do not establish a common cause. A separate A40 V2 setup case reports homing and limit alarms; keep the two configurations’ results separate.
Wood crafts & leather engraving



Published specification
Not published
Cooling not published
Software name not published.
V2 owners describe setup-dependent placement, persistent ghosting and one damaged lens. A20 and A40 specifications remain separately identified.
Reddit · Owner-reported case
An A20 Pro V2 20W owner making coasters and keychains struggled to align a honeycomb bed and repeat jig placement. Another user with the same model described securing the machine and bed to a common base. The discussion concerns workholding and alignment; it does not establish a machine accuracy defect or prove that the proposed fix worked for the original owner.
The original post explicitly names A20 Pro V2 20W. Its 500 × 500 mm figure describes an accessory honeycomb bed, not the machine working area.
Read original source: A20 Pro V2: repeat placement depends on securing the setup ↗Reddit · Owner-reported case
The owner likes the early results but still sees X-axis ghosting after belt, eccentric-nut and mounting adjustments on cardstock.
Explicit V2 case using Atomstack Studio; replies do not establish a confirmed repair.
Read original source: A20 Pro V2: persistent X-axis ghosting ↗Reddit · Owner-reported case
After weak cutting in 6 mm plywood and MDF, the owner found a cracked or burned lens after roughly 30–40 hours of use.
The V2 is explicitly named; the thread does not prove what caused the damage or confirm a completed repair.
Read original source: A20 Pro V2: damaged lens found ↗LightBurn Software Forum · Owner-reported case
A new A40 Pro V2 owner reported homing failures and repeated hard-limit alarms while setting up the machine. The posted controller output documents the symptoms, but the visible discussion does not establish the cause or a successful fix. This is a setup report, not a measured assessment of engraving quality.
The title explicitly identifies A40 Pro V2. It is not an A40 V1 report and does not verify every controller revision.
Read original source: A40 Pro V2: an unresolved new-machine homing report ↗An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.
Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.
Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.
Names the 20W V2, jigs and failed placement workflow; no measured machine defect or confirmed original-owner fix.
Names settings, material and attempted mechanical checks; the outcome remains unresolved.
Includes settings, materials, air-assist model and a physical follow-up finding.
The owner describes a concrete setup problem and later confirms that the adjustment or workaround worked.
Reddit · 2026-10-30 · Free_Wheel_2226 · Self-reported use
An A20 Pro V2 20W owner making coasters and keychains struggled to align a honeycomb bed and repeat jig placement. Another user with the same model described securing the machine and bed to a common base. The discussion concerns workholding and alignment; it does not establish a machine accuracy defect or prove that the proposed fix worked for the original owner.
Read the original discussion: A20 Pro V2: repeat placement depends on securing the setupReddit · ArgumentLow45 · Self-reported use
The owner likes the early results but still sees X-axis ghosting after belt, eccentric-nut and mounting adjustments on cardstock.
Read the original discussion: A20 Pro V2: persistent X-axis ghostingReddit · Johnnybravo812 · Self-reported use
After weak cutting in 6 mm plywood and MDF, the owner found a cracked or burned lens after roughly 30–40 hours of use.
Read the original discussion: A20 Pro V2: damaged lens foundLightBurn Software Forum · 2026-05-04 · coolsport · Self-reported use
A new A40 Pro V2 owner reported homing failures and repeated hard-limit alarms while setting up the machine. The posted controller output documents the symptoms, but the visible discussion does not establish the cause or a successful fix. This is a setup report, not a measured assessment of engraving quality.
Read the original discussion: A40 Pro V2: an unresolved new-machine homing report| Rated power | 48 W |
|---|---|
| Dimensions | 22.83 × 21.65 × 5.91 inches |
| Rated power (quoted module) | 48W output power |
|---|---|
| Dimensions | 22.83 × 21.65 × 5.91 inches |

ACMER
LightBurn is supported.

WeCreat
Autofocus handles the focusing step.

LaserPecker
LightBurn is supported.

Creality
LightBurn is supported.