Skip to content

ComMarker

66/100Score2 reviews

ComMarker 80 mm Rotary Chuck

Rotary attachments & chucksRotary chuck

80 mm three-jaw chuck; drive, connector and wiring

Check price on Amazon

Amazon · commarker

View on Amazon

Will it fit your work?

Seller reference image

Rotary chuck
ComMarker 80 mm Rotary Chuck: seller reference photoSelected listing ↗

Listed compatibility

Workpieces
Rings

This 80 mm chuck includes a motor driver, connector and wiring for installation.

Buying notes & checks

An 80 mm three-jaw chuck for fiber marking machines. The seller includes a drive and wiring and notes that other brands need different parameter settings.

Confirm the controller, motor wiring, driver settings and available height with the seller. A matching connector alone is not a compatibility check.

Score

2 reviews
66 / 100

Compatibility22.5/30

Specifications20/20

Pricing evidence5/20

Owner review evidence18.6/30

Why this score

An editorial assessment of compatibility, specifications, pricing and firsthand experience.

Compatibility

Applications documented
7.5/7.5
Laser or machine compatibility
0/7.5
Exact package identified
7.5/7.5
Fit limits and exclusions
7.5/7.5

Specifications

Size or capacity documented
10/10
Setup requirements documented
10/10

Pricing evidence

Priced exact package
0/5
Price recency
0/5
Listing identity checked
5/5
Same package cross-checked
0/5

Owner review evidence

Evidence quality
8.6/10
Reported experience
10/20

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

2 independent owner accounts.

0 Positive2 Mixed0 Negative0 No directional verdict

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

  • SaggyG · forum.lightburnsoftware.com ↗Mixed · Detailed use or test

    SaggyG says D80 works well on a ComMarker B4 but documents scale and wavy-fill problems on an OMTech Ruida setup, with steps, current and test sizes. Rotation scale was corrected; the remaining fill problem has no confirmed cause or final fix.

  • YawaraCreations identifies a new D80/60W setup, a 60-degree repeat-mark target and about 25 degrees actual rotation. The follow-up posts the corrected repeat-marking screen and attributes the issue to setup; durability and later production performance are absent.

Sources & fit notes
  • This 80 mm chuck includes a motor driver, connector and wiring for installation.
  • Its jaw ranges cover 2–63 mm external diameters and 25–70 mm internal expansion; confirm the motor connection, controller settings and engraving clearance for your machine.

How to get started

  1. PART DIAMETER01

    Check fit and wiring

    Confirm the exact connector and machine interface. Check the workpiece and rotary together for bed and laser-head clearance.

  2. ChuckRollerTYPE + MAKER CALIBRATION02

    Configure your rotary type

    Choose chuck or roller in your software and use the maker's calibration values. Do not copy settings from a different rotary model.

  3. TEST A FULL ROTATION03

    Run a small test

    Check rotation and artwork alignment on a test piece before a full wrap. Verify that the part stays secure through the movement.

General setup guidance; it does not establish compatibility with your engraver.

Reviews & discussions

D80 owners report a repeat-marking setup that was corrected and a chuck that worked on a B4 but needed more configuration on a Ruida machine. The remaining filled-artwork distortion was unresolved, so controller setup matters alongside the chuck.

Read sources (2)

LightBurn Forum · Owner-reported case

Worked on a B4; another controller needed more setup

The owner says the D80 works well on their ComMarker B4. On an OMTech Ruida setup they corrected the rotation scale, but wavy filled artwork remained unresolved. Connection alone did not carry over the working configuration.

The manufacturer identifies D80 as its 80mm three-jaw chuck. This report spans two connected machines; it does not show that the chuck itself caused the remaining distortion.

Read original source: Worked on a B4; another controller needed more setup ↗

LightBurn Forum · Owner-reported case

Repeat marking recovered after a setup correction

A D80 user initially gets the wrong rotation between repeated marks despite changing step values. Their follow-up identifies the missed repeat-marking setup and posts the corrected screen.

Resolved D80 workflow case on a ComMarker 60W fiber machine. The reported fix is not a universal steps-per-revolution value.

Read original source: Repeat marking recovered after a setup correction ↗

Research byResearch updatedResearch method

This comparison covers ComMarker 80 mm Rotary Chuck using published specifications, recorded seller prices and any available owner evidence.

Selected configuration: 80 mm three-jaw chuck; drive, connector and wiring · commarker · Original listing ↗

What specifications are published?

Chuck80mm chuck
Included partsOne chuck + one chuck drive + one connector + wiring+other accessories
Connection and setup80 mm is chuck size. Positive jaw internal 2–22 mm, reverse internal 22–63 mm; expansion 25–70 mm. Motor 57×76 mm, two-meter lead; driver+connector+wiring included. Exact machine model fit not stated in captured offer.
Size and capacity80 mm is chuck size. Positive jaw internal 2–22 mm, reverse internal 22–63 mm; expansion 25–70 mm. Motor 57×76 mm, two-meter lead; driver+connector+wiring included. Exact machine model fit not stated in captured offer.
Full specifications

80 mm three-jaw chuck; drive, connector and wiring

Chuck80mm chuck
Included partsOne chuck + one chuck drive + one connector + wiring+other accessories
Connection and setup80 mm is chuck size. Positive jaw internal 2–22 mm, reverse internal 22–63 mm; expansion 25–70 mm. Motor 57×76 mm, two-meter lead; driver+connector+wiring included. Exact machine model fit not stated in captured offer.
Size and capacity80 mm is chuck size. Positive jaw internal 2–22 mm, reverse internal 22–63 mm; expansion 25–70 mm. Motor 57×76 mm, two-meter lead; driver+connector+wiring included. Exact machine model fit not stated in captured offer.
Source ↗

Common questions

Will it work just because the plug fits?

A connector can fit while the wiring or controller requirements differ. Ask for the pinout and setup instructions for your exact engraver before connecting it.

Which diameter belongs in rotary setup?

Chuck and roller setup use different measurements. Follow your software's instructions for the chosen rotary type rather than treating chuck size, roller diameter and object diameter as the same thing.

Seller support & returns

Check the selected seller's return terms for this exact package. Ask about opened coatings or installed accessories before buying.

Selected listing: commarker ↗
Seller listings (1)

80 mm three-jaw chuck; drive, connector and wiring

Check price on AmazonAmazon
View on Amazon

More in this category