Source: https://pickalaser.com/machine/creality-falcon-a1-pro-20w

[Home](/) / [Desktop laser engravers & cutters](/cutting) / [Diode laser engraver](/cutting/diode)
![A1 Pro; 20W blue laser; 2W IR module not included](/i/2fe46e4c7f7036-480.webp)
Zoom

![Photo 1: Creality Falcon A1 Pro 20W](/i/e7193e1986eead-160.webp)

![Photo 2: Creality Falcon A1 Pro 20W](/i/abcf33e5162f9e-160.webp)

![Photo 3: Creality Falcon A1 Pro 20W](/i/cb6d65d83fb449-160.webp)

![Photo 4: A1 Pro; 20W blue laser; 2W IR module not included](/i/2fe46e4c7f7036-160.webp)

Creality

60 /100 Score 3 reviews

# Creality Falcon A1 Pro 20W

Share product

Diode laser engraver Desktop

Seller Amazon · Creality Official Store | Power 20 W | Package A1 Pro; 20W blue laser; 2W IR module not included · Check price on Amazon |

Check price on Amazon Amazon · Creality Official Store

+ Compare [View on Amazon](https://www.amazon.com/dp/B0FDWFXKG8?th=1&tag=pickalaser-20)

Camera positioning, autofocus and touchscreen control reduce manual setup. The 2W infrared module is a separate purchase; the headline 180W is not its optical output.

A1 Pro; 20W blue laser; 2W IR module not included

Check price on Amazon

[View on Amazon](https://www.amazon.com/dp/B0FDWFXKG8?th=1&tag=pickalaser-20)

Research by [PickaLaser](/about) · Research updated 2026-11-17 · [Research method](/method)

[Buying verdict](#buying-verdict)[Applications](#analysis)[Reviews & discussions](#discussion-analysis)[Specifications](#specs)[Alternatives](#alternatives)

## Buying verdict

### Why consider it

The A1 Pro 20W combines a listed 268 × 358 mm bed with autofocus and Falcon Design Space/LightBurn support. One owner praised 3 mm wood cutting and engraving accuracy after resolving a Wi-Fi problem by changing the network subnet. That is a completed individual workaround, not a requirement established for every machine.

### Where it falls short

LightBurn setup deserves a trial run before production. One early 20W case improved after configuration updates but retained an EEPROM error; another reported intermittent error 24 in LightBurn 2.1.04 while the same files ran in Falcon Design Space. These software/firmware-specific reports do not confirm a hardware fault or a universal current issue.

### Also compare

- [xTool M2](/compare?m=creality-falcon-a1-pro-20w%7Eamazon-b0fdwfxkg8-ovkfus%2Cxtool-m2%7Eofficial-xtool-8cdel3) — Compare the M2 20W for its listed 426 × 320 mm area and automatic material probing.
- [xTool S1](/compare?m=creality-falcon-a1-pro-20w%7Eamazon-b0fdwfxkg8-ovkfus%2Cxtool-s1%7Eofficial-xtool-1pk3635) — The S1 offers a separate 20W configuration with one-click autofocus and XCS/LightBurn support.

[Compare these models](/compare?m=creality-falcon-a1-pro-20w%7Eamazon-b0fdwfxkg8-ovkfus%2Cxtool-m2%7Eofficial-xtool-8cdel3%2Cxtool-s1%7Eofficial-xtool-1pk3635)

## 20 W applications

Wood, leather & coated-material personalization

[Product source ↗](https://www.amazon.com/dp/B0FDWFXKG8?th=1)

![Illustrative phone-style photo: fine dark engraved leaf outline on pale wood, shallow surface mark](/application-panels/catalog/applications-07-iphone-v1-c3r4-x0y3.webp)

### Wood line art

![Illustrative phone-style photo: a small natural tan vegetable-tanned leather tag with a dark engraved initial](/application-panels/catalog/applications-07-iphone-v1-c3r4-x1y3.webp)

### Leather personalization

![Illustrative phone-style photo: dark painted aluminum tag with a light surface logo, not bare metal cutting](/application-panels/catalog/applications-07-iphone-v1-c3r4-x2y3.webp)

### Painted-metal labels

Wood & coated materials; not clear-acrylic cutting. AI-generated examples

### Working area

26.8 × 35.8 cm

Published specification

[Source for Working area ↗](https://www.creality.com/products/falcon-a1-pro-20w)

### Cooling & electricity

Cooling not published

Voltage options 100–240 V AC, 50–60 Hz

[Source for Cooling & electricity ↗](https://www.creality.com/products/falcon-a1-pro-20w)

### Software

- Add artwork →
- Set power & speed →
- Mark / engrave

LaserGRBL Free

Windows only

LightBurn Paid extra

Windows & Mac

Falcon Design Space License not stated

OS not stated

[Source for Software ↗](https://www.creality.com/products/falcon-a1-pro-20w)

## Reviews & discussions

3 accounts

Detailed owner tests show software-specific errors and a successful network workaround; a commercial professional test reports clean plywood results and limited material height.

Read sources ( 4 )

LightBurn Software Forum · Owner-reported case

### A1 Pro 20W: updated setup helped, one firmware error remained

A 20W A1 Pro owner encountered interrupted jobs and G-code alarms in an early LightBurn setup. Later posts report successful short jobs and the workspace warning disappearing after updated configuration, while an EEPROM error remained. It is a software and firmware-era case, not proof that every current A1 Pro stops mid-job.

The owner explicitly names A1 Pro 20W. Follow-up through September 2025 is included; A1 10W and A1C cases are not transferred.

[Read original source : A1 Pro 20W: updated setup helped, one firmware error remained ↗](https://forum.lightburnsoftware.com/t/several-errors-in-the-same-work-creality-falcon-a1-pro/177926)

LightBurn Software Forum · Owner-reported case

### A1 Pro 20W: some LightBurn cuts failed while native software worked

A second 20W owner reported intermittent error 24 on fonts and imported artwork in LightBurn 2.1.04. The same files ran in Falcon Design Studio. Cable changes and several settings checks had not solved it in the visible thread, so a hardware cause or final fix is not established.

A distinct owner names A1 Pro 20W and firmware 1.1.10. Advice in replies is not a confirmed diagnosis.

[Read original source : A1 Pro 20W: some LightBurn cuts failed while native software worked ↗](https://forum.lightburnsoftware.com/t/falcon-a1-pro-error-24-two-g-code-commands-that-both-require-the-use-of-the-xyz-axis-words-were-detected/193300)

Reddit · Owner-reported case

### A1 Pro: Wi-Fi workaround helped

The owner praises 3 mm wood cutting and engraving accuracy after a two-day Wi-Fi problem was resolved by changing the home-network subnet.

An individual workaround; it does not establish that every A1 Pro requires this network change.

[Read original source : A1 Pro: Wi-Fi workaround helped ↗](https://www.reddit.com/r/Creality/comments/1u6vo61/falcon_a1_pro_wifi_tip_for_new_users/)

TechRadar · Owner-reported case

### A1 Pro: clean plywood results

The reviewer reports clean 6 mm plywood cuts and accurate camera placement, while limited material height and accessory costs constrain the workflow.

Affiliate-funded professional review; optional 2W IR results do not describe the base 20W module.

[Read original source : A1 Pro: clean plywood results ↗](https://www.techradar.com/pro/creality-falcon-a1-pro-laser-engraver-review)

0 Positive 0 Negative 0 Neutral 3 Mixed

### Topics mentioned

Software 3 accounts +

0 Positive 0 Negative 0 Neutral 3 Mixed

Reliability 2 accounts +

0 Positive 0 Negative 0 Neutral 2 Mixed

Service & repairs 1 account +

0 Positive 0 Negative 0 Neutral 1 Mixed

## Score

3 reviews

60 / 100

An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.

Specifications 27.5 / 30

Pricing evidence 0 / 20

After-sales clarity 15 / 20

Owner review evidence 17.9 / 30

Evidence quality 7.9 / 10

Reported experience 10 / 20

3 Mixed Small sample

3 independent accounts · 11 / 12 fields fully sourced [Method ↗](/method#buying-score)

[Share your experience with this machine](/contact#owner-report) Why this score

### Specifications

Laser source | 2.5 / 2.5 |

Wavelength | 2.5 / 2.5 |

Output power | 2.5 / 2.5 |

Electrical supply | 2.5 / 2.5 |

Cooling | 2.5 / 2.5 |

Dimensions | 2.5 / 2.5 |

Machine weight | 2.5 / 2.5 |

Working area | 2.5 / 2.5 |

Marking speed | 2.5 / 2.5 |

Mark detail | 0 / 2.5 |

Software | 2.5 / 2.5 |

Focus method | 2.5 / 2.5 |

### Pricing evidence

Named configuration & power | 0 / 4 |

Seller & price source | 0 / 4 |

Price recency | 0 / 4 |

Verified power options | 0 / 4 |

Two-channel power coverage | 0 / 4 |

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

- [serjforius · LightBurn Software Forum ↗](https://forum.lightburnsoftware.com/t/several-errors-in-the-same-work-creality-falcon-a1-pro/177926) Mixed · Detailed use or test

Documents MDF settings, logs, cables and profile updates; later jobs improved but an EEPROM error remained.

- [CodsworthsPotatoFarm · LightBurn Software Forum ↗](https://forum.lightburnsoftware.com/t/falcon-a1-pro-error-24-two-g-code-commands-that-both-require-the-use-of-the-xyz-axis-words-were-detected/193300) Mixed · Detailed use or test

Identifies firmware, software, files and repeated cable tests; the same designs work in Falcon Design Space.

- [omni-observer · Reddit ↗](https://www.reddit.com/r/Creality/comments/1u6vo61/falcon_a1_pro_wifi_tip_for_new_users/) Mixed · Specific use account

Describes the failing and working network settings and gives a completed follow-up.

- 1 after-sales policy areas remain unconfirmed.
- Small review sample; reported experiences may not represent other buyers.

Owner reviews & discussions

LightBurn Software Forum · 2025-08-19 · serjforius · Self-reported use

### A1 Pro 20W: updated setup helped, one firmware error remained

Mixed Detailed use or test

A 20W A1 Pro owner encountered interrupted jobs and G-code alarms in an early LightBurn setup. Later posts report successful short jobs and the workspace warning disappearing after updated configuration, while an EEPROM error remained. It is a software and firmware-era case, not proof that every current A1 Pro stops mid-job.

[Read the original discussion : A1 Pro 20W: updated setup helped, one firmware error remained](https://forum.lightburnsoftware.com/t/several-errors-in-the-same-work-creality-falcon-a1-pro/177926)

LightBurn Software Forum · 2026-10-19 · CodsworthsPotatoFarm · Self-reported use

### A1 Pro 20W: some LightBurn cuts failed while native software worked

Mixed Detailed use or test

A second 20W owner reported intermittent error 24 on fonts and imported artwork in LightBurn 2.1.04. The same files ran in Falcon Design Studio. Cable changes and several settings checks had not solved it in the visible thread, so a hardware cause or final fix is not established.

[Read the original discussion : A1 Pro 20W: some LightBurn cuts failed while native software worked](https://forum.lightburnsoftware.com/t/falcon-a1-pro-error-24-two-g-code-commands-that-both-require-the-use-of-the-xyz-axis-words-were-detected/193300)

Reddit · omni-observer · Self-reported use

### A1 Pro: Wi-Fi workaround helped

Mixed Specific use account

The owner praises 3 mm wood cutting and engraving accuracy after a two-day Wi-Fi problem was resolved by changing the home-network subnet.

[Read the original discussion : A1 Pro: Wi-Fi workaround helped](https://www.reddit.com/r/Creality/comments/1u6vo61/falcon_a1_pro_wifi_tip_for_new_users/)

More reviews & discussions ( 1 )

TechRadar · 2025-11-01 · Alastair Jennings · Commercial review

### A1 Pro: clean plywood results

Positive Detailed use or test

The reviewer reports clean 6 mm plywood cuts and accurate camera placement, while limited material height and accessory costs constrain the workflow.

[Read the original discussion : A1 Pro: clean plywood results](https://www.techradar.com/pro/creality-falcon-a1-pro-laser-engraver-review)

Creality warranty and service

Creality Falcon’s US policy lists 12 months from receipt for covered non-user-caused faults with valid proof of purchase.

Repairs | Warranty requests go through official support; unauthorized repairs, misuse and specified third-party damage are excluded. Local repair availability is not published. |

Support | Creality Falcon offers online support, tutorials and spare parts at support@crealityfalcon.com. |

Returns | Direct website orders: 14-day returns for eligible unused or faulty products and 30-day replacement requests for qualifying damage, mismatch or defects. Amazon return conditions are separate. |

Not confirmed | Repair turnaround, spare-part lead times and loaner availability are not published. Marketplace orders follow the seller’s applicable terms. |

Sources [crealityfalcon.com 1 ↗](https://www.crealityfalcon.com/pages/warranty-policy)[crealityfalcon.com 2 ↗](https://www.crealityfalcon.com/policies/refund-policy)[crealityfalcon.com 3 ↗](https://www.crealityfalcon.com/pages/contact-us)

## What specifications are published?

Rated power | 20 W |

Dimensions | 32 × 27 × 15 inches |

Full specifications

### A1 Pro; 20W blue laser; 2W IR module not included

IR module exclusion | The 2W IR Laser Module for high-precision metal and plastic engraving is NOT included and needs to be purchased separately |

Rated power (quoted module) | 20W blue-laser |

Dimensions | 32 × 27 × 15 inches |

### Listing 2

Laser source | 20W semiconductor diode laser[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Rated power | 20 W blue module; 2W IR is optional[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Wavelength | 455 ± 5 nm (20W module)[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Electrical | 100–240 V AC, 50–60 Hz[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Dimensions | 567 × 468 × 211 mm; 685 mm wide with screen[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Machine weight | 16.8 kg[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Working area | 268 × 358 mm[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Max speed | 600 mm/s[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Software | Falcon Design Space, LightBurn, LaserGRBL[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Focus method | Autofocus[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

Cooling | Two fans on the laser head[Source ↗](https://www.creality.com/products/falcon-a1-pro-20w) |

[Source ↗](https://www.amazon.com/dp/B0FDWFXKG8?th=1)

## Similar models

[See all Diode laser engraver](/cutting/diode)

[![Longer Ray5 20W](/i/627fc9c5f82faf-480.webp) + Compare Longer ### Longer Ray5 20W 43 /100 Score 2 reviews Diode · Desktop 20 W LightBurn is supported. From Check price](/machine/longer-ray5-20w)[![SCULPFUN E1 Pro 21W](/i/395ca716df9cc4-480.webp) + Compare SCULPFUN ### SCULPFUN E1 Pro 21W 46 /100 Score 1 review Diode · Desktop 21 W LightBurn is supported. From Check price](/machine/sculpfun-e1-pro-21w)[![Longer B1 30W](/i/1ef98e7f8522d1-480.webp) + Compare Longer ### Longer B1 30W 47 /100 Score 1 review Diode · Desktop 30 W LightBurn is supported. From Check price](/machine/longer-b1-30w)[![ACMER S2 12W](/i/880559d37f0f5d-480.webp) + Compare ACMER ### ACMER S2 12W 49 /100 Score 1 review Diode · Desktop 12 W LightBurn is supported. From Check price](/machine/acmer-s2-12w)


As an Amazon Associate I earn from qualifying purchases.
