Source: https://pickalaser.com/machine/commarker-b4-fiber-laser-engraver

[Home](/) / [Laser markers](/marking) / [Fiber laser marker](/marking/fiber)
![ComMarker B4 desktop fiber laser engraver](/i/843325eb3a0485-480.webp)
Zoom

![Photo 1: ComMarker B4 desktop fiber laser engraver](/i/843325eb3a0485-160.webp)

![Photo 2: Seller examples of engraved tags, jewelry, rings and drinkware](/i/cbf231dc3a45d9-160.webp)

![Photo 3: ComMarker B4 connected to a laptop for design setup](/i/ddce61b9c624cc-160.webp)

![Photo 4: ComMarker B4: B4-20W](/i/129634b2c7294f-160.webp)

ComMarker

73 /100 Score 9 reviews

# ComMarker B4 Fiber Laser Engraver

Share product

Fiber laser marker Desktop

Seller Amazon · ComMarker | ComMarker store | Power 20 W | 30 W | 50 W | 100 W | Package Two lenses · Check price on Amazon | Two lenses + 5-in-1 rotary · Check price on Amazon |

Check price on Amazon Amazon · commarker

+ Compare [View on Amazon](https://www.amazon.com/dp/B0BW8HWRBX?tag=pickalaser-20)

B4 20W, two lenses

Check price on Amazon

[View on Amazon](https://www.amazon.com/dp/B0BW8HWRBX?tag=pickalaser-20)

Research by [PickaLaser](/about) · Research updated 2026-11-17 · [Research method](/method)

[Buying verdict](#buying-verdict)[Applications](#analysis)[Reviews & discussions](#owners)[Specifications](#specs)[Alternatives](#alternatives)

## Buying verdict

### Why consider it

The B4 manual specifies a fiber source, air cooling and 110 × 110 mm or 200 × 200 mm lens fields. Owners have shared working settings and rotary setups.

### Where it falls short

Focusing and parameter tuning take time. Reports include power loss, mid-job stopping and slow support; a 30W owner waited about three months for a replacement source.

### Also compare

- [OMTech GALVO Compact Integrated](/compare?m=commarker-b4-fiber-laser-engraver%7Eamazon-b0bw8hwrbx-19e6yf5%2Comtech-galvo-compact-integrated%7Eofficial-omtech-gyg6xm) — Compare the exact 50W OMTech package with LightBurn.
- [xTool F1 Ultra](/compare?m=commarker-b4-fiber-laser-engraver%7Eamazon-b0bw8hwrbx-19e6yf5%2Cxtool-f1-ultra%7Eofficial-xtool-1rkswip) — Compare F1 Ultra if one machine must handle both metal and diode-laser materials.

[Compare these models](/compare?m=commarker-b4-fiber-laser-engraver%7Eamazon-b0bw8hwrbx-19e6yf5%2Comtech-galvo-compact-integrated%7Eofficial-omtech-gyg6xm%2Cxtool-f1-ultra%7Eofficial-xtool-1rkswip)

## 20 W applications

Surface marking & personalization

[Product source ↗](https://store.commarker.com/products/b4-fiber-laser-engraver)

20 W · Fiber 30 W · Fiber 50 W · Fiber 100 W · Fiber

![AI illustration of flat dark identification marks on a stainless-steel tag, photographed on a worn workshop mat](/application-panels/b4/20w-iphone-v1-c3r1-x0y0.webp)

### Serial numbers & QR marks

![AI illustration of a silver surface logo on black anodized aluminum, with ordinary workshop scratches](/application-panels/b4/20w-iphone-v1-c3r1-x1y0.webp)

### Anodized-aluminum logos

![AI illustration of a name and fine flower outline marked on a flat steel dog tag](/application-panels/b4/20w-iphone-v1-c3r1-x2y0.webp)

### Personalized metal tags

Not recommended for sheet cutting AI-generated examples

### Working area

11 × 11 cm

20 × 20 cm

Published model range

Larger field: 3.3 × the area

[Source for Working area ↗](https://www.amazon.com/dp/B0BW8HWRBX)

### Cooling & electricity

Air-cooled

+ No coolant loop to maintain

− Needs cool room air & clear vents

Room: 5–35°C

Voltage options 110V | 220V

[Source for Cooling & electricity ↗](https://blog.commarker.com/archives/28543)

### Software

- Add artwork →
- Set power & speed →
- Mark / engrave

EZCAD2 Included

Windows only

LightBurn Pro Paid extra

Windows & Mac

[Source for Software ↗](https://commarker.com/download-center)

## Owner feedback

9 accounts

1 Positive 3 Negative 0 Neutral 3 Mixed 2 Unrated

### Topics mentioned

Material results 3 accounts +

0 Positive 1 Negative 0 Neutral 1 Mixed 1 Unrated

Setup & learning 6 accounts +

0 Positive 2 Negative 0 Neutral 2 Mixed 2 Unrated

Software 1 account +

0 Positive 0 Negative 0 Neutral 1 Unrated

Rotary & accessories 2 accounts +

1 Positive 1 Negative 0 Neutral

Reliability 4 accounts +

1 Positive 2 Negative 0 Neutral 1 Mixed

Service & repairs 3 accounts +

0 Positive 1 Negative 0 Neutral 2 Mixed

## Score

9 reviews

73 / 100

An editorial buying assessment of specifications, prices, after-sales terms and the quality and balance of firsthand experiences. This is not a laboratory test or a customer star rating.

Specifications 25 / 30

Pricing evidence 12 / 20

After-sales clarity 20 / 20

Owner review evidence 15.8 / 30

Evidence quality 8.1 / 10

Reported experience 7.7 / 20

1 Positive 3 Negative 3 Mixed 2 No directional verdict

9 independent accounts · 10 / 12 fields fully sourced [Method ↗](/method#buying-score)

[Share your experience with this machine](/contact#owner-report) Why this score

### Specifications

Laser source | 2.5 / 2.5 |

Wavelength | 2.5 / 2.5 |

Output power | 2.5 / 2.5 |

Electrical supply | 2.5 / 2.5 |

Cooling | 2.5 / 2.5 |

Dimensions | 2.5 / 2.5 |

Machine weight | 2.5 / 2.5 |

Working area | 2.5 / 2.5 |

Marking speed | 2.5 / 2.5 |

Mark detail | 0 / 2.5 |

Software | 2.5 / 2.5 |

Focus method | 0 / 2.5 |

### Pricing evidence

Named configuration & power | 4 / 4 |

Seller & price source | 4 / 4 |

Price recency | 4 / 4 |

Verified power options | 0 / 4 |

Two-channel power coverage | 0 / 4 |

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

- [supergary69 · Reddit ↗](https://www.reddit.com/r/Laserengraving/comments/1xiy1bb/has_commarker_scammed_me/) Mixed · Specific use account

The owner gives a concrete purchase or support interaction and its outcome, with limited information about sustained engraving performance.

- [shammy417 · Reddit ↗](https://www.reddit.com/r/Laserengraving/comments/1sujevr/fiber_laser_losing_power/pdwhwob/) Negative · Specific use account

The owner describes a specific operational problem, but the available account does not establish its cause or a completed repair.

- [quakenbake64 · Reddit ↗](https://www.reddit.com/r/Laserengraving/comments/1tkmth4/commarker_b4_50w_suggested_settings/) No directional verdict · Brief impression

The author describes ownership or asks for settings, but does not provide a clear positive or negative operating verdict.

- [le9chamarmygagXD · Reddit ↗](https://www.reddit.com/r/Laserengraving/comments/1tkmth4/comment/on9pbtv/) No directional verdict · Specific use account

The owner describes actual materials, settings or job results in enough detail to judge the reported use.

- [Seba_Mop · Reddit ↗](https://www.reddit.com/r/Laserengraving/comments/1sujevr/fiber_laser_losing_power/) Mixed · Detailed use or test

This detailed 30W B4 account covers roughly 1.5 years of use, loss of power and a replacement source after about three months of support exchanges; the initial unresolved post is not the final outcome.

- [Creed303 · Reddit ↗](https://www.reddit.com/r/Laserengraving/comments/1rfa07k/commarker_b4_30w_fiber_laser_engraver_stops/) Negative · Detailed use or test

The owner documents the fault, test conditions and several troubleshooting steps; the cause remains unconfirmed.

- [MattCaz · LightBurn Software Forum ↗](https://forum.lightburnsoftware.com/t/xtool-ra2-on-commarker-fiber-and-omni-1-uv-lasers/176554/1) Positive · Detailed use or test

The owner describes actual materials, settings or job results in enough detail to judge the reported use.

- [tcbeaton · LightBurn Software Forum ↗](https://forum.lightburnsoftware.com/t/looking-for-ballpark-settings-to-cut-metal-business-cards-on-commarker-b4-20w-fiber-laser/176307/1) Mixed · Specific use account

The owner names the material and a concrete result or limitation; this does not establish performance on other materials.

- [rothfam5 · LightBurn Software Forum ↗](https://forum.lightburnsoftware.com/t/commarker-b4-tumbler-help/171996/1) Negative · Detailed use or test

The owner describes actual materials, settings or job results in enough detail to judge the reported use.

Owner reviews & discussions

Reddit · 2026-05-22 · quakenbake64

### 50W: limited starting settings

Unrated Brief impression

A 50W owner had made progress on test pieces but could only find 20W starting settings on the website. They needed material-specific guidance.

[Original post : 50W: limited starting settings ↗](https://www.reddit.com/r/Laserengraving/comments/1tkmth4/commarker_b4_50w_suggested_settings/)

Reddit · 2026-05-22 · le9chamarmygagXD

### 50W: LightBurn settings shared

Unrated Specific use account

A 50W user shared LightBurn settings for surface marks and deeper material removal. They tested settings on each material.

[Original post : 50W: LightBurn settings shared ↗](https://www.reddit.com/r/Laserengraving/comments/1tkmth4/comment/on9pbtv/)

LightBurn Software Forum · 2025-05-17 · rothfam5

### 20W: tumbler focus problems

Negative Detailed use or test

A 20W owner struggled with tumbler coatings, focus and field-size information despite prior LightBurn experience.

[Original post : 20W: tumbler focus problems ↗](https://forum.lightburnsoftware.com/t/commarker-b4-tumbler-help/171996/1)

LightBurn Software Forum · 2025-07-25 · tcbeaton

### 20W: marking worked; cutting did not

Mixed Specific use account

A 20W owner could mark metal business cards but could not cut through them after adjusting speed, power, frequency and passes.

[Original post : 20W: marking worked; cutting did not ↗](https://forum.lightburnsoftware.com/t/looking-for-ballpark-settings-to-cut-metal-business-cards-on-commarker-b4-20w-fiber-laser/176307/1)

LightBurn Software Forum · 2025-07-29 · MattCaz

### 30W: RA2 rotary worked after setup

Positive Detailed use or test

An xTool RA2 worked on one B4 30W after matching the rotary driver's settings. The owner warned that incorrect settings could overheat the motor.

[Original post : 30W: RA2 rotary worked after setup ↗](https://forum.lightburnsoftware.com/t/xtool-ra2-on-commarker-fiber-and-omni-1-uv-lasers/176554/1)

Reddit · 2026-02-26 · Creed303

### 30W: stopped engraving; replacement agreed

Negative Detailed use or test

A 30W unit stopped engraving while red-light scanning continued. ComMarker agreed to replace it; the thread does not document the replacement outcome.

[Original post : 30W: stopped engraving; replacement agreed ↗](https://www.reddit.com/r/Laserengraving/comments/1rfa07k/commarker_b4_30w_fiber_laser_engraver_stops/)

Reddit · 2026-04-24 · Seba_Mop

### 30W: replacement source after three months

Mixed Detailed use or test

After about 18 months, a 30W owner reported weaker engraving. A replacement source arrived after roughly three months of emails; long-term results were not posted.

[Original post : 30W: replacement source after three months ↗](https://www.reddit.com/r/Laserengraving/comments/1sujevr/fiber_laser_losing_power/)

Reddit · 2026-10-04 · shammy417

### 20W: shallow marking unresolved

Negative Specific use account

A 20W owner reported suddenly shallow marks on stainless steel. Restoring the correction file did not help; the thread records no diagnosis or repair.

[Original post : 20W: shallow marking unresolved ↗](https://www.reddit.com/r/Laserengraving/comments/1sujevr/fiber_laser_losing_power/pdwhwob/)

Reddit · 2026-10-29 · supergary69

### 30W: compact source clarified

Mixed Specific use account

A buyer questioned the 30W unit's smaller chassis. Support supplied a photo of a compact source, and the buyer kept the machine; no output measurement was reported.

[Original post : 30W: compact source clarified ↗](https://www.reddit.com/r/Laserengraving/comments/1xiy1bb/has_commarker_scammed_me/)

ComMarker warranty and service

B-series warranty: 2 years

Repairs | ComMarker first diagnoses faults remotely and may request return to its repair center. Approved covered faults may be repaired or replaced; proof of purchase is required. |

Support | Email support@commarker.com with the order number and fault details for remote troubleshooting. |

Returns | Official-store orders: 30-day conditional returns. No service fee in the first 14 days; days 15–30 carry 10%–30% machine fees by condition. Non-quality return shipping is paid by the buyer; platform orders use their seller’s terms. |

Not confirmed | Part exclusions, parts lead times and loaners: unknown. |

Sources [store.commarker.com 1 ↗](https://store.commarker.com/pages/warranty-returns)

## What specifications are published?

Rated power | 20 W |

Working area | 110 × 110 mm / 200 × 200 mm |

Software | EZCAD2 (included) / LightBurn |

Laser source | MAX fiber laser (20W) |

Wavelength | 1064 nm |

Marking speed | 0–15,000 mm/s |

Full specifications

### Listing 1

Dimensions | 270 × 380 × 560 mm[Source ↗](https://store.commarker.com/products/b4-fiber-laser-engraver) |

Rated power | 20W | 30W | 50W | 100W[Source ↗](https://store.commarker.com/products/b4-fiber-laser-engraver) |

Software | LightBurn and EZCAD2[Source ↗](https://store.commarker.com/products/b4-fiber-laser-engraver) |

Electrical | 110V | 220V[Source ↗](https://store.commarker.com/products/b4-fiber-laser-engraver) |

Machine weight | 11 kg[Source ↗](https://store.commarker.com/products/b4-fiber-laser-engraver) |

### Listing 2

Laser source | Fiber[Source ↗](https://commarker.com/dist/js/uploads/Machines/BSeries/B4/Manual/B4UserManual.pdf#page=11) |

Wavelength | 1064nm[Source ↗](https://commarker.com/dist/js/uploads/Machines/BSeries/B4/Manual/B4UserManual.pdf#page=11) |

Cooling | Air[Source ↗](https://commarker.com/dist/js/uploads/Machines/BSeries/B4/Manual/B4UserManual.pdf#page=11) |

### Listing 3

Working area | 110mm*110mm /200mm*200mm[Source ↗](https://www.amazon.com/dp/B0BW8LK895) |

### B4 20W, two lenses

Laser source | MAX fiber laser (20W) |

Working area | 110 × 110 mm / 200 × 200 mm |

Wavelength | 1064 nm |

Marking speed | 0–15,000 mm/s |

Frequency | 20–60 kHz |

Software | EZCAD2 (included) / LightBurn |

Supported operating systems | Windows 7/8/10/11; macOS with LightBurn |

Minimum line width | 0.01 mm |

Supported graphics formats | BMP, GIF, JPG, JPEG, DXF, DST, Al, etc. |

Compatible materials | Seller lists stainless steel, aluminum, gold, silver, alloys, and most plastics and rubbers. |

Model | ComMarker B4 |

- 30W source: the Amazon listing names both MAX and Raycus.
- Chassis: current listing shows 11 kg; the older manual lists larger 30W–100W versions.

[Source ↗](https://www.amazon.com/dp/B0BW8HWRBX)

## Similar models

[See all Fiber laser marker](/marking/fiber)

[![OMTech GALVO Split](/i/1dc6d33d4b2ff2-480.webp) + Compare OMTech ### OMTech GALVO Split 73 /100 Score 1 review Fiber · Split head 20 W – 100 W The listed working area is 175 × 175 mm. From $1,699.99](/machine/omtech-galvo-split)[![Gweike G2 / G2 Pro / G2 Max](/i/dc3a821d0b2a17-480.webp) + Compare Gweike ### Gweike G2 / G2 Pro / G2 Max 65 /100 Score 12 reviews Fiber · Desktop 20 W – 50 W The listed working area is G2 20W: 110mm*110mm/150mm*150mm. From $1,299](/machine/gweike-g2-g2-pro-g2-max)[![Monport GM / GM Pro Q-switched Integrated Fiber (20/30/50W)](/i/d301353ec40b86-480.webp) + Compare Monport ### Monport GM / GM Pro Q-switched Integrated Fiber (20/30/50W) 76 /100 Score 1 review Fiber · Desktop 20 W – 50 W LightBurn is supported. From $1,410](/machine/monport-gm-gm-pro-q-switched-integrated-fiber-20-30-50w)[![OMTech GALVO Compact Integrated](/i/1baf9f73308c06-480.webp) + Compare OMTech ### OMTech GALVO Compact Integrated 79 /100 Score 1 review Fiber · Desktop 20 W – 60 W LightBurn is supported. From $1,599.99](/machine/omtech-galvo-compact-integrated)


As an Amazon Associate I earn from qualifying purchases.
