Source: https://pickalaser.com/comparisons/commarker-b6-mopa-vs-monport-ga60

# ComMarker B6 60W MOPA vs Monport GA60

Compare the exact 60W packages for lens field and setup. The B6 review unit had a 170 mm lens. ComMarker lists 150 × 150 mm for the standard package below.

Research by [PickaLaser](/about) · Research updated 2026-11-19 · [Research method](/method)

## Which should you shortlist?

Check the B6 if bench space or a split setup matters. Consider the GA60 if its 175 × 175 mm field fits a part that needs more room. For stainless color work, ask each seller to run the same alloy, finish and shape with the quoted lens.

ComMarker B6 60W MOPA vs Monport GA60 | [ComMarker B6 60W MOPA](/machine/commarker-b6-jpt-mopa-fiber-laser-engraver?option=official-store-ec4ujc) | [Monport GA60 60W MOPA](/machine/monport-ga-series-mopa-30-60-100w-current-listing-ga100?option=amazon-b0cwnx4svt-1ihy2b9) |

Seller configuration | B6 MOPA 60W / B6 MOPA Basic Bundle | GA60 60W MOPA / selected 60W |

Rated power | 60 W | 60 W |

Published standard field | 150 × 150 mm | 175 × 175 mm |

Setup | Integrated or split | Integrated with a folding column |

Sample to compare | Your exact finish and shape on stainless | The same piece and the same acceptance criteria |

Seller price | $3,599 Checked 2026-11-19 [View seller](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?variant=52030373462386) | Check with seller[View seller](https://www.amazon.com/dp/B0CWNX4SVT?tag=pickalaser-20) |

Specification source | [ComMarker B6 60W MOPA ↗](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver) | [Monport GA60 60W MOPA ↗](https://monportlaser.com/collections/ga-series-mopa-fiber-laser/products/monport-60e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine) |

## Which layout fits your parts and bench?

Measure working height, reach and the footprint of the entire station. A split configuration can change where the source cabinet sits. For the GA60, check that the quoted lens and folding column accommodate the part plus fixture. Confirm the useful area at the edges of the field with a sample.

## How should a color-marking trial be judged?

Use your exact stainless alloy, finish and part shape. Include minimum legible size and a reference for the required color. Ask for several repeat marks and examine them under the same light. A successful sample on a different surface offers limited evidence for color repeatability.

## Which evidence can carry over to your order?

Read the video conditions and check the exact lens and power in the quote. The GA60 video records specific shim thicknesses and results. For purchasing, request a trial on your thickness, using the actual package and a written acceptance criterion.

## Video tests

### B6 60W reuses B4 settings on anodized aluminum

Test conditions | The B6 60W MOPA review unit had a 170 mm field lens. The reviewer reused anodized aluminum settings from a B4 60W MOPA with a smaller lens. |

Observed result | The settings still produced markings, but the gray came out lighter. The 170 mm figure describes the review unit. |

The video description discloses affiliate links.

[Watch on YouTube · JT Makes It · 3:42 ↗](https://www.youtube.com/watch?v=_KxAxplENZw&t=222s)

### B6 60W color tests on flat and curved stainless steel

Test conditions | B6 60W MOPA review unit with a 170 mm field lens. The reviewer ran the supplied flat stainless color sample and then marked a curved, coated flask after removing the coating in the marked area. |

Observed result | The flat preset gave a clear color sample. On the flask, the reviewer reported less accurate colors and replaced one part of the design with a white mark. |

The video description discloses affiliate links.

[Watch on YouTube · JT Makes It · 4:01 ↗](https://www.youtube.com/watch?v=_KxAxplENZw&t=241s)

### GA60 and B6 with the same reported 60W JPT source

Test conditions | The reviewer put a GA60 with a 175 mm lens beside a B6 with a 170 mm lens. He identified both review units as 60W JPT M7 E2. |

Observed result | The GA60 occupied more space and felt more rigid to the reviewer. This chapter compares the hardware and does not time a matched engraving job on both models. |

The video description discloses affiliate links.

[Watch on YouTube · JT Makes It · 3:02 ↗](https://www.youtube.com/watch?v=hd1snTDuCNk&t=182s)

### GA60 60W stainless cut-through by thickness

Test conditions | GA60 60W MOPA with a 175 × 175 mm field. The reviewer tried 0.05, 0.10 and 0.20 mm stainless shim stock in LightBurn. |

Observed result | The 0.05 mm stock cut in 1–2 passes. The 0.10 mm stock needed 5–6 and began to warp. The 0.20 mm attempt was stopped before the design cut out. |

Monport supplied the GA60. The reviewer disclosed affiliate links.

[Watch on YouTube · Hoffman Engineering · 8:28 ↗](https://www.youtube.com/watch?v=Yqnhk_zyAUk&t=508s)

[Open the configuration comparison](/compare?m=commarker-b6-jpt-mopa-fiber-laser-engraver%7Eofficial-store-ec4ujc%2Cmonport-ga-series-mopa-30-60-100w-current-listing-ga100%7Eamazon-b0cwnx4svt-1ihy2b9)[Explore the job and equipment](/uses/laser-serial-number-marking)[Read the marking guide](/guides/fiber-mopa-uv-co2-diode-laser-guide)


As an Amazon Associate I earn from qualifying purchases.
