Source: https://pickalaser.com/accessory/xtool-ra2-pro-rotary

[Home](/) / [Rotary attachments & chucks](/rotary-attachments)
![xTool RA2 Pro Rotary](/i/d88d790ed1c8bc-480.webp)
Zoom

![Photo 1: xTool RA2 Pro Rotary](/i/d88d790ed1c8bc-160.webp)

![Photo 2: xTool RA2 Pro Rotary](/i/1ffb583c4b5c98-160.webp)

![Photo 3: xTool RA2 Pro Rotary](/i/be570e043e812c-160.webp)

![Photo 4: xTool RA2 Pro Rotary](/i/280c22ee8601ac-160.webp)

xTool

75 /100 Score 2 reviews

# xTool RA2 Pro Rotary

Share product

Rotary attachments & chucks Rotary accessory

RA2 Pro 4-in-1 rotary attachment

Check price on Amazon

Amazon · xTool Official

[View on Amazon](https://www.amazon.com/dp/B0CJ2BXQ7N?tag=pickalaser-20)

[Fit & size](#fit)[Setup steps](#setup)[Reviews & discussions](#discussions)[Specifications](#specs)[Common questions](#questions)[Alternatives](#alternatives)

## Will it fit your work?

### Seller reference image

Rotary accessory

[![xTool RA2 Pro Rotary: seller reference photo](/i/1ffb583c4b5c98-480.webp)](/i/1ffb583c4b5c98.webp)[Selected listing ↗](https://www.amazon.com/dp/B0CJ2BXQ7N)

### Listed compatibility

Machine / series | ✓ xTool S1 ✓ xTool F1 ✓ xTool F1 Ultra ✓ xTool P2 ✓ xTool M1 Ultra |

Workpieces | ✓ Cups & tumblers ✓ Rings ✓ Spheres ✓ Tapered drinkware |

This RA2 Pro offer lists xTool S1, F1, F1 Ultra, P2 and M1 Ultra support and provides roller, chuck, ring and sphere modes.

Buying notes & checks

A four-in-one rotary for cylinders, rings and spheres. The seller lists a riser requirement; check which riser your machine needs.

Confirm the controller, motor wiring, driver settings and available height with the seller. A matching connector alone is not a compatibility check.

## Score

2 reviews

75 / 100

Compatibility 30 / 30

Specifications 20 / 20

Pricing evidence 5 / 20

Owner review evidence 19.5 / 30

Why this score

An editorial assessment of compatibility, specifications, pricing and firsthand experience.

### Compatibility

Applications documented | 7.5 / 7.5 |

Laser or machine compatibility | 7.5 / 7.5 |

Exact package identified | 7.5 / 7.5 |

Fit limits and exclusions | 7.5 / 7.5 |

### Specifications

Size or capacity documented | 10 / 10 |

Setup requirements documented | 10 / 10 |

### Pricing evidence

Priced exact package | 0 / 5 |

Price recency | 0 / 5 |

Listing identity checked | 5 / 5 |

Same package cross-checked | 0 / 5 |

### Owner review evidence

Evidence quality | 9.5 / 10 |

Reported experience | 10 / 20 |

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

2 independent owner accounts.

1 Positive 0 Mixed 1 Negative 0 No directional verdict

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

- [MikeyH · forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/setting-up-a-rotary-chuck-or-roller/142443) Positive · Detailed use or test

MikeyH describes first-hand RA2 Pro chuck testing on two Sculpfun machines, full-turn alignment, measured workpiece size and verification against a 50mm pattern. The practical procedure supports successful calibration, not one universal setting or a retail-bundle claim.

- [Apples · forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/rotary-chuck-stalling-and-restarting/174009) Negative · Detailed use or test

Apples reports an RA2 replaced after initial faults, then about 18 months of operation before recurrent stalls damaged ceramics. Cleaning and computer changes failed; the same D1 Pro also stalled a YRC1.0, so the cause cannot be assigned solely to RA2.

Sources & fit notes

- This RA2 Pro offer lists xTool S1, F1, F1 Ultra, P2 and M1 Ultra support and provides roller, chuck, ring and sphere modes.
- Check the riser and clearance requirements for your machine; the 26° adjustment module belongs to the separate Deluxe package and is not automatically included.

- [amazon.com ↗](https://www.amazon.com/dp/B0CJ2BXQ7N) Seller listing
- [xtool.com ↗](https://www.xtool.com/products/xtool-ra2-pro) Manufacturer
- [support.xtool.com ↗](https://support.xtool.com/article/588) Manufacturer
- [forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/setting-up-a-rotary-chuck-or-roller/142443) Owner account
- [forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/rotary-chuck-stalling-and-restarting/174009) Owner account

## How to get started

- 0 1

### Check fit and wiring

Confirm the exact connector and machine interface. Check the workpiece and rotary together for bed and laser-head clearance.

- 0 2

### Configure your rotary type

Choose chuck or roller in your software and use the maker's calibration values. Do not copy settings from a different rotary model.

- 0 3

### Run a small test

Check rotation and artwork alignment on a test piece before a full wrap. Verify that the part stays secure through the movement.

General setup guidance; it does not establish compatibility with your engraver.

[LightBurn rotary setup reference ↗](https://docs.lightburnsoftware.com/latest/Reference/RotaryMode/)

Reviews & discussions

The RA2 Pro has practical setup accounts, including successful chuck calibration and an unresolved stalling case on a D1 Pro. Match the rotary mode, firmware and connected engraver before copying settings.

Read sources ( 3 )

LightBurn Forum · Owner setup guide

### Chuck and roller settings need different checks

The author describes using an RA2 Pro chuck and an Atezr roller on Sculpfun machines, checking a full revolution, entering diameter and measuring the finished result. It is a useful setup procedure, not one set of values to copy.

First-person setup guide. Motor steps, roller diameter and object diameter depend on the machine and rotary being configured.

[Read original guide : Chuck and roller settings need different checks ↗](https://forum.lightburnsoftware.com/t/setting-up-a-rotary-chuck-or-roller/142443)

LightBurn Forum · Owner-reported case

### A stalling case spans two chuck models

A D1 Pro user reports intermittent stopping with both an RA2 and a YRC 1.0. Replies suggest checking the drive system and acceleration, but the thread does not establish a final cause.

One user and one connected engraver. This is not evidence of a failure rate for either rotary.

[Read original source : A stalling case spans two chuck models ↗](https://forum.lightburnsoftware.com/t/rotary-chuck-stalling-and-restarting/174009)

xTool Support · Manufacturer guidance

### xTool explains why the machine and firmware matter

xTool's D1-series support guidance distinguishes D1 from D1 Pro and chuck mode from roller mode. Compatibility should be checked against the machine, firmware and control software together.

Manufacturer support document from 2023. Do not apply its D1 settings to newer P2, F2 or RA3 hardware.

[Read original guide : xTool explains why the machine and firmware matter ↗](https://support.xtool.com/article/588)

Research by [PickaLaser](/about) · Research updated 2026-11-15 · [Research method](/method)

This comparison covers xTool RA2 Pro Rotary using published specifications, recorded seller prices and any available owner evidence.

Selected configuration : RA2 Pro 4-in-1 rotary attachment · xTool Official · [Original listing ↗](https://www.amazon.com/dp/B0CJ2BXQ7N)

## What specifications are published?

Compatible xTool models | S1, F1, F1 Ultra, P2, M1 Ultra |

Machine clearance | Must with Riser |

Connection and setup | Riser requirement must be checked per machine. Do not transfer RA3 smart LiDAR features. Captured exact list: S1/F1/F1 Ultra/P2/M1 Ultra. Most engravers is not verified model support. Current RA2 Pro Deluxe adds a 26° adjustment module; standard RA2 Pro does not automatically include that module. Current official family diameter ranges: roller 3–198 mm, chuck 0–100 mm, sphere 25–100 mm, ring 11–70 mm; machine clearance can be lower. |

Size and capacity | Current RA2 Pro Deluxe adds a 26° adjustment module; standard RA2 Pro does not automatically include that module. Current official family diameter ranges: roller 3–198 mm, chuck 0–100 mm, sphere 25–100 mm, ring 11–70 mm; machine clearance can be lower. |

Full specifications

### RA2 Pro 4-in-1 rotary attachment

Compatible xTool models | S1, F1, F1 Ultra, P2, M1 Ultra |

Machine clearance | Must with Riser |

Connection and setup | Riser requirement must be checked per machine. Do not transfer RA3 smart LiDAR features. Captured exact list: S1/F1/F1 Ultra/P2/M1 Ultra. Most engravers is not verified model support. Current RA2 Pro Deluxe adds a 26° adjustment module; standard RA2 Pro does not automatically include that module. Current official family diameter ranges: roller 3–198 mm, chuck 0–100 mm, sphere 25–100 mm, ring 11–70 mm; machine clearance can be lower. |

Size and capacity | Current RA2 Pro Deluxe adds a 26° adjustment module; standard RA2 Pro does not automatically include that module. Current official family diameter ranges: roller 3–198 mm, chuck 0–100 mm, sphere 25–100 mm, ring 11–70 mm; machine clearance can be lower. |

[Source ↗](https://www.amazon.com/dp/B0CJ2BXQ7N)

## Common questions

Will it work just because the plug fits?

A connector can fit while the wiring or controller requirements differ. Ask for the pinout and setup instructions for your exact engraver before connecting it.

Which diameter belongs in rotary setup?

Chuck and roller setup use different measurements. Follow your software's instructions for the chosen rotary type rather than treating chuck size, roller diameter and object diameter as the same thing.

Seller support & returns

Check the selected seller's return terms for this exact package. Ask about opened coatings or installed accessories before buying.

[Selected listing : xTool Official ↗](https://www.amazon.com/dp/B0CJ2BXQ7N)

Seller listings ( 1 )

- RA2 Pro 4-in-1 rotary attachment

Amazon · xTool Official

[Check Amazon price](https://www.amazon.com/dp/B0CJ2BXQ7N?tag=pickalaser-20)

RA2 Pro 4-in-1 rotary attachment

Check price on Amazon Amazon

[View on Amazon](https://www.amazon.com/dp/B0CJ2BXQ7N?tag=pickalaser-20)

## More in this category

[![ACMER M3 Rotary Roller](/i/9681fd3c963885-480.webp) ACMER ### ACMER M3 Rotary Roller 45 /100 Score 0 reviews Rotary attachment From Check price](/accessory/acmer-m3-rotary)[![Longer Rotary Roller](/i/96daf2f03b641d-480.webp) Longer ### Longer Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/longer-new-rotary-roller)[![Creality Laser Rotary Roller](/i/61c7ba3861e468-480.webp) Creality ### Creality Laser Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/creality-rotary-roller)[![ORTUR YRR Rotary Roller](/i/d609f584780f59-480.webp) ORTUR ### ORTUR YRR Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/ortur-yrr-rotary)


As an Amazon Associate I earn from qualifying purchases.
