Source: https://pickalaser.com/accessory/omtech-co2-three-jaw-rotary

[Home](/) / [Rotary attachments & chucks](/rotary-attachments)
![OMTech CO2 Three-Jaw Rotary Chuck](/i/ff35151f487db6-480.webp)
Zoom

![Photo 1: OMTech CO2 Three-Jaw Rotary Chuck](/i/ff35151f487db6-160.webp)

![Photo 2: OMTech CO2 Three-Jaw Rotary Chuck](/i/56d48c01b4ebdc-160.webp)

![Photo 3: OMTech CO2 Three-Jaw Rotary Chuck](/i/df58f0e2906d86-160.webp)

![Photo 4: OMTech CO2 Three-Jaw Rotary Chuck](/i/1ae546cf90618f-160.webp)

OMTech

65 /100 Score 1 review

# OMTech CO2 Three-Jaw Rotary Chuck

Share product

Rotary attachments & chucks Rotary chuck

Three-jaw rotary for CO2 engravers

Check price on Amazon

Amazon · OMTech Direct

[View on Amazon](https://www.amazon.com/dp/B09BVR8TBC?tag=pickalaser-20)

[Fit & size](#fit)[Setup steps](#setup)[Reviews & discussions](#discussions)[Specifications](#specs)[Common questions](#questions)[Alternatives](#alternatives)

## Will it fit your work?

### Seller reference image

Rotary chuck

[![OMTech CO2 Three-Jaw Rotary Chuck: seller reference photo](/i/56d48c01b4ebdc-480.webp)](/i/56d48c01b4ebdc.webp)[Selected listing ↗](https://www.amazon.com/dp/B09BVR8TBC)

### Listed compatibility

Machine / series | ✓ CO2 gantry — check connector |

Workpieces | ✓ Cups & tumblers ✓ Bottles |

This three-jaw chuck and tailstock package is intended for compatible CO2 gantry engravers; it is separate from OMTech’s fiber rotaries.

Buying notes & checks

A chuck intended for compatible CO2 engraving machines. Check the controller, plug wiring and usable Z clearance; fiber-machine rotaries are a different purchase.

Confirm the controller, motor wiring, driver settings and available height with the seller. A matching connector alone is not a compatibility check.

## Score

1 review

65 / 100

Compatibility 30 / 30

Specifications 10 / 20

Pricing evidence 5 / 20

Owner review evidence 19.5 / 30

Why this score

An editorial assessment of compatibility, specifications, pricing and firsthand experience.

### Compatibility

Applications documented | 7.5 / 7.5 |

Laser or machine compatibility | 7.5 / 7.5 |

Exact package identified | 7.5 / 7.5 |

Fit limits and exclusions | 7.5 / 7.5 |

### Specifications

Size or capacity documented | 0 / 10 |

Setup requirements documented | 10 / 10 |

### Pricing evidence

Priced exact package | 0 / 5 |

Price recency | 0 / 5 |

Listing identity checked | 5 / 5 |

Same package cross-checked | 0 / 5 |

### Owner review evidence

Evidence quality | 9.5 / 10 |

Reported experience | 10 / 20 |

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

1 independent owner accounts.

0 Positive 1 Mixed 0 Negative 0 No directional verdict

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

- [taylorcd2010 · forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/omtech-rotary-chuck-setup-in-lb/57582) Mixed · Detailed use or test

Taylorcd2010 identifies an OMTech chuck on a 55W Ruida machine, excessive rotation at 8000 steps and a wrong return, then confirms correct rotation at 4000 after checking the driver. A later link identifies the historical three-jaw offer; present SKU is not verified.

Sources & fit notes

- This three-jaw chuck and tailstock package is intended for compatible CO2 gantry engravers; it is separate from OMTech’s fiber rotaries.
- Confirm the four-wire connection, motor driver and usable Z clearance; correct rotation settings depend on the connected machine and driver.

- [amazon.com ↗](https://www.amazon.com/dp/B09BVR8TBC) Seller listing
- [forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/omtech-rotary-chuck-setup-in-lb/57582) Owner account

## How to get started

- 0 1

### Check fit and wiring

Confirm the exact connector and machine interface. Check the workpiece and rotary together for bed and laser-head clearance.

- 0 2

### Configure your rotary type

Choose chuck or roller in your software and use the maker's calibration values. Do not copy settings from a different rotary model.

- 0 3

### Run a small test

Check rotation and artwork alignment on a test piece before a full wrap. Verify that the part stays secure through the movement.

General setup guidance; it does not establish compatibility with your engraver.

[LightBurn rotary setup reference ↗](https://docs.lightburnsoftware.com/latest/Reference/RotaryMode/)

Reviews & discussions

The discussion links the exact Amazon chuck and records a successful rotation calibration after an initially incorrect setup. Driver gearing determines the setting; one owner's number is not a specification for every machine.

Read sources ( 1 )

LightBurn Forum · Owner-reported case

### Rotation calibration was resolved on the linked chuck

A Ruida-system owner reports that a full-turn test rotated too far and did not return correctly. After checking the driver and testing, they report correct rotation and later link the exact Amazon chuck listing.

The linked ASIN is B09BVR8TBC, matching this product. The successful setting was specific to that driver and gearing; do not copy it as a universal value.

[Read original source : Rotation calibration was resolved on the linked chuck ↗](https://forum.lightburnsoftware.com/t/omtech-rotary-chuck-setup-in-lb/57582)

Research by [PickaLaser](/about) · Research updated 2026-11-15 · [Research method](/method)

This comparison covers OMTech CO2 Three-Jaw Rotary Chuck using published specifications, recorded seller prices and any available owner evidence.

Selected configuration : Three-jaw rotary for CO2 engravers · OMTech Direct · [Original listing ↗](https://www.amazon.com/dp/B09BVR8TBC)

## What specifications are published?

Listed model | OMTech |

Connection and setup | CO2 gantry package with tailstock, seller 50 W or higher; four-wire cable. Do not match by wattage alone. Controller, motor driver, plug and Z clearance need checking; not the fiber rotary. |

Full specifications

### Three-jaw rotary for CO2 engravers

Listed model | OMTech |

Connection and setup | CO2 gantry package with tailstock, seller 50 W or higher; four-wire cable. Do not match by wattage alone. Controller, motor driver, plug and Z clearance need checking; not the fiber rotary. |

[Source ↗](https://www.amazon.com/dp/B09BVR8TBC)

## Common questions

Will it work just because the plug fits?

A connector can fit while the wiring or controller requirements differ. Ask for the pinout and setup instructions for your exact engraver before connecting it.

Which diameter belongs in rotary setup?

Chuck and roller setup use different measurements. Follow your software's instructions for the chosen rotary type rather than treating chuck size, roller diameter and object diameter as the same thing.

Seller support & returns

Check the selected seller's return terms for this exact package. Ask about opened coatings or installed accessories before buying.

[Selected listing : OMTech Direct ↗](https://www.amazon.com/dp/B09BVR8TBC)

Seller listings ( 1 )

- Three-jaw rotary for CO2 engravers

Amazon · OMTech Direct

[Check Amazon price](https://www.amazon.com/dp/B09BVR8TBC?tag=pickalaser-20)

Three-jaw rotary for CO2 engravers

Check price on Amazon Amazon

[View on Amazon](https://www.amazon.com/dp/B09BVR8TBC?tag=pickalaser-20)

## More in this category

[![ACMER M3 Rotary Roller](/i/9681fd3c963885-480.webp) ACMER ### ACMER M3 Rotary Roller 45 /100 Score 0 reviews Rotary attachment From Check price](/accessory/acmer-m3-rotary)[![Longer Rotary Roller](/i/96daf2f03b641d-480.webp) Longer ### Longer Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/longer-new-rotary-roller)[![Creality Laser Rotary Roller](/i/61c7ba3861e468-480.webp) Creality ### Creality Laser Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/creality-rotary-roller)[![ORTUR YRR Rotary Roller](/i/d609f584780f59-480.webp) ORTUR ### ORTUR YRR Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/ortur-yrr-rotary)


As an Amazon Associate I earn from qualifying purchases.
