Source: https://pickalaser.com/accessory/laserbond-100-spray

[Home](/) / [Laser marking sprays](/marking-sprays)
![LaserBond 100 Marking Spray & Ink](/i/5dd8ecb5ffab21-480.webp)
Zoom

![Photo 1: LaserBond 100 Marking Spray & Ink](/i/5dd8ecb5ffab21-160.webp)

![Photo 2: LaserBond 100 Marking Spray & Ink](/i/c5a9a37d5e294c-160.webp)

![Photo 3: LaserBond 100 Marking Spray & Ink](/i/641b3f1b908de0-160.webp)

![Photo 4: LaserBond 100 Marking Spray & Ink](/i/203447c2de43ab-160.webp)

LaserBond

73 /100 Score 1 review

# LaserBond 100 Marking Spray & Ink

Share product

Laser marking sprays Ink / concentrate

Package Amazon · 12 oz aerosol, one can — LaserBond 100 · Check price on Amazon | Amazon · 50 g ink; mix with denatured alcohol; brush or spray gun · Check price on Amazon | Amazon · 12 oz aerosol; two cans · Check price on Amazon | Check price on Amazon

1 × 1.76 oz

Amazon · JPPlus

[View on Amazon](https://www.amazon.com/dp/B087QRTRC3?tag=pickalaser-20)

[Fit & size](#fit)[Setup steps](#setup)[Reviews & discussions](#discussions)[Specifications](#specs)[Common questions](#questions)[Alternatives](#alternatives)

## Material, finish & package

### Seller reference image

Ink / concentrate

[![LaserBond 100 Marking Spray & Ink: seller reference photo](/i/c5a9a37d5e294c-480.webp)](/i/c5a9a37d5e294c.webp)[Selected listing ↗](https://www.amazon.com/dp/B087QRTRC3)

### What the price buys

1 × 1.76 oz

Bottles

### Listed compatibility

Materials | ✓ Bare metals (check exact alloy) ✓ Stainless steel ✓ Aluminum ✓ Brass ✓ Copper ✓ Glass ✓ Ceramic |

Laser types | ✓ CO2 ✓ Fiber (check mode/frequency) ✓ YAG |

The 50 g ink is a concentrate. Mix it with denatured alcohol according to the liquid-ink instructions, then apply with a brush, airbrush or spray gun; it is not ready-to-spray aerosol.

Buying notes & checks

LaserBond 100 gives you a choice between ready-mixed aerosol and ink for your own applicator. The seller lists metal, glass, ceramic and stone, but coating consistency and a test on your material still matter.

The ink's lower package price also means mixing and application work. Denatured alcohol and application equipment need to be arranged separately unless the selected listing explicitly includes them.

## Score

1 review

73 / 100

Compatibility 30 / 30

Specifications 20 / 20

Pricing evidence 5 / 20

Owner review evidence 17.6 / 30

Why this score

An editorial assessment of compatibility, specifications, pricing and firsthand experience.

### Compatibility

Applications documented | 7.5 / 7.5 |

Laser or machine compatibility | 7.5 / 7.5 |

Exact package identified | 7.5 / 7.5 |

Fit limits and exclusions | 7.5 / 7.5 |

### Specifications

Size or capacity documented | 10 / 10 |

Setup requirements documented | 10 / 10 |

### Pricing evidence

Priced exact package | 0 / 5 |

Price recency | 0 / 5 |

Listing identity checked | 5 / 5 |

Same package cross-checked | 0 / 5 |

### Owner review evidence

Evidence quality | 7.6 / 10 |

Reported experience | 10 / 20 |

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

1 independent owner accounts.

0 Positive 1 Mixed 0 Negative 0 No directional verdict

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

- [Trick-Seat4901 · reddit.com ↗](https://www.reddit.com/r/Laserengraving/comments/zs12ls/best_marking_spray_for_plain_stainless_steel/) Mixed · Specific use account

Trick-Seat4901 explicitly owns LaserBond and LMM6000, calls LaserBond versatile and useful, but prefers LMM6000 for stainless. Thin-coat practice is described; exact can, laser configuration and comparative test settings are not identified.

Sources & fit notes

- The 50 g ink is a concentrate. Mix it with denatured alcohol according to the liquid-ink instructions, then apply with a brush, airbrush or spray gun; it is not ready-to-spray aerosol.
- Protective lacquer prevents the coating from bonding to metal. Published application instructions cover CO2, fiber and YAG; confirm diode suitability with the supplier before purchase.

- [amazon.com ↗](https://www.amazon.com/dp/B087QRTRC3) Seller listing
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laser_bond_100_ink.pdf) Manufacturer
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laser_bond_100_ink.pdf) Manufacturer
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laser_bond_100_ink.pdf) Manufacturer
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laser_bond_100_ink.pdf) Manufacturer
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laser_bond_100_ink.pdf) Manufacturer
- [amazon.com ↗](https://www.amazon.com/dp/B0875QLGXR) Seller listing
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laserbond_100_aerosol_spray_can_instructions.pdf) Manufacturer
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laserbond_100_aerosol_spray_can_instructions.pdf) Manufacturer
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laserbond_100_aerosol_spray_can_instructions.pdf) Manufacturer
- [jpp.trgcdn.com ↗](https://jpp.trgcdn.com/media/mageworx/downloads/attachment/file/l/a/laserbond_100_aerosol_spray_can_instructions.pdf) Manufacturer
- [amazon.com ↗](https://www.amazon.com/dp/B08XMNR4FH) Seller listing
- [reddit.com ↗](https://www.reddit.com/r/Laserengraving/comments/zs12ls/best_marking_spray_for_plain_stainless_steel/) Owner account
- [forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/stainless-cermark-sprays-vs-paste/179518) Research context

## How to get started

- 0 1

### Mix the ink

The 50 g ink needs denatured alcohol. Follow the bottle's dilution instructions for your brush, airbrush or spray gun.

- 0 2

### Apply a thin, even coat

Prepare a consistent coating with your chosen applicator. Runs and brush marks can carry through to the finished mark.

- 0 3

### Test your actual material

Start on a spare piece with the recommended settings. Inspect the mark after the product's cleanup procedure before processing the finished part.

Follow the product label for ventilation, handling and drying before marking.

Setup reference

[JPPlus LaserBond application FAQ ↗](https://www.jpplus.com/resources/laser-engraving-faq)

Reviews & discussions

LaserBond users report durable marks, but their posts do not consistently identify the form or package size. The 50 g ink needs mixing and application equipment; choose the aerosol for ready-to-spray use. Do not assume the bottle and can have equal coverage or the same preparation.

Read sources ( 3 )

Reddit · Owner-reported case

### Metal-spray users compare marking and cleanup

Users report good stainless-steel results with LMM6000 and LaserBond. One prefers Brilliance for easier residue removal; another could not get the red OMTech spray to mark with a 10W Ortur diode.

Different formulas, lasers and settings were used. The red-spray failure is a 10W-diode case, outside its listed CO2/fiber use; it does not establish a general failure rate.

[Read original source : Metal-spray users compare marking and cleanup ↗](https://www.reddit.com/r/Laserengraving/comments/zs12ls/best_marking_spray_for_plain_stainless_steel/)

Reddit · Owner-reported case

### Good marks, with different experiences of the can

Users describe clear Brilliance marks after rinsing and durable LaserBond results. Blackdragon1400 reports a failed Brilliance can and prefers OMTech. Cleanup and nozzle operation matter alongside the final mark.

A mixed community discussion, not a controlled comparison. Formula and package sizes are not consistently identified.

[Read original source : Good marks, with different experiences of the can ↗](https://www.reddit.com/r/lasercutting/comments/1b0h953/)

Amazon seller listing · Seller specifications · not an owner review

### Ink preparation differs from aerosol preparation

The 50 g bottle instructions call for denatured alcohol: at least 1:1 for brush use or 2:1 for an airbrush or spray gun. The aerosol comes ready to spray. A lower bottle price does not mean the same ready-to-use volume or equipment.

Seller instructions for the 50 g ink. The community reports below discuss LaserBond marking results without establishing the bottle form or its coverage.

[Read original source : Ink preparation differs from aerosol preparation ↗](https://www.amazon.com/dp/B087QRTRC3)

Research by [PickaLaser](/about) · Research updated 2026-11-15 · [Research method](/method)

This comparison covers LaserBond 100 Marking Spray & Ink using published specifications, recorded seller prices and any available owner evidence.

Selected configuration : 50 g ink; mix with denatured alcohol; brush or spray gun · JPPlus · [Original listing ↗](https://www.amazon.com/dp/B087QRTRC3)

## What specifications are published?

Package (ink) | 50g |

Ink preparation | use a ratio of at least 1:1 when applying the product with a brush, or 2:1 when using an airbrush or spray gun |

Package size | 50 g ink; mix with denatured alcohol; brush or spray gun |

Preparation | Aerosol: shake~1min; spray thin even6–8in away; dry completely; mark; rinse; invert can to clear nozzle. / Ink: mix thoroughly; dilute with denatured alcohol at least1:1 for foam brush or2:1 for airbrush/spraygun per liquid instructions. Dry completely. |

Full specifications

### Listing 1

Can size | 12 oz[Source ↗](https://www.amazon.com/dp/B0875QLGXR) |

Listed laser types | CO2, Fiber, YAG, and Diode[Source ↗](https://www.amazon.com/dp/B0875QLGXR) |

### 50 g ink; mix with denatured alcohol; brush or spray gun

Package (ink) | 50g |

Ink preparation | use a ratio of at least 1:1 when applying the product with a brush, or 2:1 when using an airbrush or spray gun |

Package size | 50 g ink; mix with denatured alcohol; brush or spray gun |

Preparation | Aerosol: shake~1min; spray thin even6–8in away; dry completely; mark; rinse; invert can to clear nozzle. |

Preparation | Ink: mix thoroughly; dilute with denatured alcohol at least1:1 for foam brush or2:1 for airbrush/spraygun per liquid instructions. Dry completely. |

### Listing 3

Package (two-can aerosol) | 12 oz 2 Pack[Source ↗](https://www.amazon.com/dp/B08XMNR4FH) |

Aerosol application | Hold the aerosol spray can 6 – 8 inches from the substrate surface[Source ↗](https://www.amazon.com/dp/B08XMNR4FH) |

[Source ↗](https://www.amazon.com/dp/B087QRTRC3)

## Common questions

Is the 50 g bottle ready to spray?

No. It is ink that needs dilution and an applicator. Choose an aerosol package if you want the ready-mixed spray format.

Can I compare the bottle and can by quantity alone?

They are different forms of the product. These listings do not establish equal coverage for a 50 g bottle and a 12 oz can; preparation and application equipment also differ.

Seller support & returns

Check the selected seller's return terms for this exact package. Ask about opened coatings or installed accessories before buying.

[Selected listing : JPPlus ↗](https://www.amazon.com/dp/B087QRTRC3)

Seller listings ( 3 )

- 12 oz aerosol, one can — LaserBond 100

Amazon · JPPlus

[Check Amazon price](https://www.amazon.com/dp/B0875QLGXR?tag=pickalaser-20)
- 50 g ink; mix with denatured alcohol; brush or spray gun

Amazon · JPPlus

[Check Amazon price](https://www.amazon.com/dp/B087QRTRC3?tag=pickalaser-20)
- 12 oz aerosol; two cans

Amazon · JPPlus

[Check Amazon price](https://www.amazon.com/dp/B08XMNR4FH?tag=pickalaser-20)

50 g ink; mix with denatured alcohol; brush or spray gun

Check price on Amazon Amazon

[View on Amazon](https://www.amazon.com/dp/B087QRTRC3?tag=pickalaser-20)

## More in this category

[![CerMark Ultra Black Marking Aerosol](/i/0f0ebaf374c7d4-480.webp) CerMark ### CerMark Ultra Black Marking Aerosol 85 /100 Score 1 review Marking spray From Check price](/accessory/cermark-ultra-spray)[![OMTech Black Laser Marking Spray](/i/69fe94a7ade386-480.webp) OMTech ### OMTech Black Laser Marking Spray 78 /100 Score 2 reviews Marking spray From Check price](/accessory/omtech-metal-marking-spray)[![OMTech Red Laser Marking Spray](/i/224acb597183ea-480.webp) OMTech ### OMTech Red Laser Marking Spray 63 /100 Score 1 review Marking spray From Check price](/accessory/omtech-red-marking-spray)[![xTool Black Laser Marking Spray](/i/2fab48042f6fee-480.webp) xTool ### xTool Black Laser Marking Spray 83 /100 Score 1 review Marking spray From Check price](/accessory/xtool-black-marking-spray)


As an Amazon Associate I earn from qualifying purchases.
