Source: https://pickalaser.com/accessory/commarker-80mm-rotary-chuck

[Home](/) / [Rotary attachments & chucks](/rotary-attachments)
![ComMarker 80 mm Rotary Chuck](/i/ca9aa656442025-480.webp)
Zoom

![Photo 1: ComMarker 80 mm Rotary Chuck](/i/ca9aa656442025-160.webp)

![Photo 2: ComMarker 80 mm Rotary Chuck](/i/2d0a82c950322b-160.webp)

![Photo 3: ComMarker 80 mm Rotary Chuck](/i/231e5d8b264def-160.webp)

![Photo 4: ComMarker 80 mm Rotary Chuck](/i/cbf314b9ba7f0f-160.webp)

ComMarker

66 /100 Score 2 reviews

# ComMarker 80 mm Rotary Chuck

Share product

Rotary attachments & chucks Rotary chuck

80 mm three-jaw chuck; drive, connector and wiring

Check price on Amazon

Amazon · commarker

[View on Amazon](https://www.amazon.com/dp/B0B87SP145?tag=pickalaser-20)

[Fit & size](#fit)[Setup steps](#setup)[Reviews & discussions](#discussions)[Specifications](#specs)[Common questions](#questions)[Alternatives](#alternatives)

## Will it fit your work?

### Seller reference image

Rotary chuck

[![ComMarker 80 mm Rotary Chuck: seller reference photo](/i/2d0a82c950322b-480.webp)](/i/2d0a82c950322b.webp)[Selected listing ↗](https://www.amazon.com/dp/B0B87SP145)

### Listed compatibility

Workpieces | ✓ Rings |

This 80 mm chuck includes a motor driver, connector and wiring for installation.

Buying notes & checks

An 80 mm three-jaw chuck for fiber marking machines. The seller includes a drive and wiring and notes that other brands need different parameter settings.

Confirm the controller, motor wiring, driver settings and available height with the seller. A matching connector alone is not a compatibility check.

## Score

2 reviews

66 / 100

Compatibility 22.5 / 30

Specifications 20 / 20

Pricing evidence 5 / 20

Owner review evidence 18.6 / 30

Why this score

An editorial assessment of compatibility, specifications, pricing and firsthand experience.

### Compatibility

Applications documented | 7.5 / 7.5 |

Laser or machine compatibility | 0 / 7.5 |

Exact package identified | 7.5 / 7.5 |

Fit limits and exclusions | 7.5 / 7.5 |

### Specifications

Size or capacity documented | 10 / 10 |

Setup requirements documented | 10 / 10 |

### Pricing evidence

Priced exact package | 0 / 5 |

Price recency | 0 / 5 |

Listing identity checked | 5 / 5 |

Same package cross-checked | 0 / 5 |

### Owner review evidence

Evidence quality | 8.6 / 10 |

Reported experience | 10 / 20 |

Reviews: evidence quality contributes 10 points and reported experience contributes 20. We average independent accounts; more reviews do not automatically earn more points. Sample size affects confidence only.

2 independent owner accounts.

0 Positive 2 Mixed 0 Negative 0 No directional verdict

Mixed or unrated accounts use the experience midpoint; they are not counted as positive endorsements.

- [SaggyG · forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/help-setting-up-commarker-d80-chuck-in-an-omtech-af2028-ruida-controller/156689) Mixed · Detailed use or test

SaggyG says D80 works well on a ComMarker B4 but documents scale and wavy-fill problems on an OMTech Ruida setup, with steps, current and test sizes. Rotation scale was corrected; the remaining fill problem has no confirmed cause or final fix.

- [YawaraCreations · forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/repeat-marking-commarker-60w-fiber-d80-rotary-chuck/151016) Mixed · Specific use account

YawaraCreations identifies a new D80/60W setup, a 60-degree repeat-mark target and about 25 degrees actual rotation. The follow-up posts the corrected repeat-marking screen and attributes the issue to setup; durability and later production performance are absent.

Sources & fit notes

- This 80 mm chuck includes a motor driver, connector and wiring for installation.
- Its jaw ranges cover 2–63 mm external diameters and 25–70 mm internal expansion; confirm the motor connection, controller settings and engraving clearance for your machine.

- [amazon.com ↗](https://www.amazon.com/dp/B0B87SP145) Seller listing
- [forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/help-setting-up-commarker-d80-chuck-in-an-omtech-af2028-ruida-controller/156689) Owner account
- [forum.lightburnsoftware.com ↗](https://forum.lightburnsoftware.com/t/repeat-marking-commarker-60w-fiber-d80-rotary-chuck/151016) Owner account

## How to get started

- 0 1

### Check fit and wiring

Confirm the exact connector and machine interface. Check the workpiece and rotary together for bed and laser-head clearance.

- 0 2

### Configure your rotary type

Choose chuck or roller in your software and use the maker's calibration values. Do not copy settings from a different rotary model.

- 0 3

### Run a small test

Check rotation and artwork alignment on a test piece before a full wrap. Verify that the part stays secure through the movement.

General setup guidance; it does not establish compatibility with your engraver.

[LightBurn rotary setup reference ↗](https://docs.lightburnsoftware.com/latest/Reference/RotaryMode/)

Reviews & discussions

D80 owners report a repeat-marking setup that was corrected and a chuck that worked on a B4 but needed more configuration on a Ruida machine. The remaining filled-artwork distortion was unresolved, so controller setup matters alongside the chuck.

Read sources ( 2 )

LightBurn Forum · Owner-reported case

### Worked on a B4; another controller needed more setup

The owner says the D80 works well on their ComMarker B4. On an OMTech Ruida setup they corrected the rotation scale, but wavy filled artwork remained unresolved. Connection alone did not carry over the working configuration.

The manufacturer identifies D80 as its 80mm three-jaw chuck. This report spans two connected machines; it does not show that the chuck itself caused the remaining distortion.

[Read original source : Worked on a B4; another controller needed more setup ↗](https://forum.lightburnsoftware.com/t/help-setting-up-commarker-d80-chuck-in-an-omtech-af2028-ruida-controller/156689)

LightBurn Forum · Owner-reported case

### Repeat marking recovered after a setup correction

A D80 user initially gets the wrong rotation between repeated marks despite changing step values. Their follow-up identifies the missed repeat-marking setup and posts the corrected screen.

Resolved D80 workflow case on a ComMarker 60W fiber machine. The reported fix is not a universal steps-per-revolution value.

[Read original source : Repeat marking recovered after a setup correction ↗](https://forum.lightburnsoftware.com/t/repeat-marking-commarker-60w-fiber-d80-rotary-chuck/151016)

Research by [PickaLaser](/about) · Research updated 2026-11-15 · [Research method](/method)

This comparison covers ComMarker 80 mm Rotary Chuck using published specifications, recorded seller prices and any available owner evidence.

Selected configuration : 80 mm three-jaw chuck; drive, connector and wiring · commarker · [Original listing ↗](https://www.amazon.com/dp/B0B87SP145)

## What specifications are published?

Chuck | 80mm chuck |

Included parts | One chuck + one chuck drive + one connector + wiring+other accessories |

Connection and setup | 80 mm is chuck size. Positive jaw internal 2–22 mm, reverse internal 22–63 mm; expansion 25–70 mm. Motor 57×76 mm, two-meter lead; driver+connector+wiring included. Exact machine model fit not stated in captured offer. |

Size and capacity | 80 mm is chuck size. Positive jaw internal 2–22 mm, reverse internal 22–63 mm; expansion 25–70 mm. Motor 57×76 mm, two-meter lead; driver+connector+wiring included. Exact machine model fit not stated in captured offer. |

Full specifications

### 80 mm three-jaw chuck; drive, connector and wiring

Chuck | 80mm chuck |

Included parts | One chuck + one chuck drive + one connector + wiring+other accessories |

Connection and setup | 80 mm is chuck size. Positive jaw internal 2–22 mm, reverse internal 22–63 mm; expansion 25–70 mm. Motor 57×76 mm, two-meter lead; driver+connector+wiring included. Exact machine model fit not stated in captured offer. |

Size and capacity | 80 mm is chuck size. Positive jaw internal 2–22 mm, reverse internal 22–63 mm; expansion 25–70 mm. Motor 57×76 mm, two-meter lead; driver+connector+wiring included. Exact machine model fit not stated in captured offer. |

[Source ↗](https://www.amazon.com/dp/B0B87SP145)

## Common questions

Will it work just because the plug fits?

A connector can fit while the wiring or controller requirements differ. Ask for the pinout and setup instructions for your exact engraver before connecting it.

Which diameter belongs in rotary setup?

Chuck and roller setup use different measurements. Follow your software's instructions for the chosen rotary type rather than treating chuck size, roller diameter and object diameter as the same thing.

Seller support & returns

Check the selected seller's return terms for this exact package. Ask about opened coatings or installed accessories before buying.

[Selected listing : commarker ↗](https://www.amazon.com/dp/B0B87SP145)

Seller listings ( 1 )

- 80 mm three-jaw chuck; drive, connector and wiring

Amazon · commarker

[Check Amazon price](https://www.amazon.com/dp/B0B87SP145?tag=pickalaser-20)

80 mm three-jaw chuck; drive, connector and wiring

Check price on Amazon Amazon

[View on Amazon](https://www.amazon.com/dp/B0B87SP145?tag=pickalaser-20)

## More in this category

[![ACMER M3 Rotary Roller](/i/9681fd3c963885-480.webp) ACMER ### ACMER M3 Rotary Roller 45 /100 Score 0 reviews Rotary attachment From Check price](/accessory/acmer-m3-rotary)[![Longer Rotary Roller](/i/96daf2f03b641d-480.webp) Longer ### Longer Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/longer-new-rotary-roller)[![Creality Laser Rotary Roller](/i/61c7ba3861e468-480.webp) Creality ### Creality Laser Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/creality-rotary-roller)[![ORTUR YRR Rotary Roller](/i/d609f584780f59-480.webp) ORTUR ### ORTUR YRR Rotary Roller 55 /100 Score 0 reviews Rotary attachment From Check price](/accessory/ortur-yrr-rotary)


As an Amazon Associate I earn from qualifying purchases.
